The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.213 INCHES MINIMUM AND 0.223 INCHES MAXIMUM IN, material: ALUMINUM ALLOY 2024 OVERALL, overall_width: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN, special_features: CLAMP,LOOP IS HEAT TREATED TO T42 TEMPER IN ACCORDANCE WITH AMS-H-6088., style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED. This part is cataloged in the U.S.
Government catalog under NSN 5340-01-625-5578, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
AS5587D07
NSN:5340-01-625-5578 FSC:5340 — Hardware, Commercial CAGE:0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
diameter
0.213 INCHES MINIMUM AND 0.223 INCHES MAXIMUM IN
material
ALUMINUM ALLOY 2024 OVERALL
overall_width
0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
special_features
CLAMP,LOOP IS HEAT TREATED TO T42 TEMPER IN ACCORDANCE WITH AMS-H-6088.
style_designator
SINGLE LOOP
tongue_hole_type
ROUND, UNTHREADED
surface_treatment
CHROMATE OVERALL
material_thickness
0.022 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN
loop_inside_diameter
0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
material_document_and_classification
ASM-QQ-A-250/5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
distance_from_loop_center_to_tongue_end
0.748 INCHES NOMINAL IN
part_name_assigned_by_controlling_agency
CLAMP, LOOP, PLAIN, SUPPORT, AIRCRAFT
NSN
5340-01-625-5578
COMPONENT DIAGRAM
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-5541, CLASS 1A MIL SPEC SINGLE TREATMENT RESPONSE OVERALL A
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASM-QQ-A-250/5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
DIAMETER: 0.213 INCHES MINIMUM AND 0.223 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.022 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.748 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
MIL-C-5541, CLASS 1A MIL SPEC SINGLE TREATMENT RESPONSE OVERALL A
STYLE DESIGNATOR
SINGLE LOOP
MATERIAL DOCUMENT AND CLASSIFICATION
ASM-QQ-A-250/5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
DIAMETER
0.213 INCHES MINIMUM AND 0.223 INCHES MAXIMUM IN
OVERALL WIDTH
0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
MATERIAL THICKNESS
0.022 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END
0.748 INCHES NOMINAL IN
SPECIAL FEATURES
CLAMP,LOOP IS HEAT TREATED TO T42 TEMPER IN ACCORDANCE WITH AMS-H-6088.
SURFACE TREATMENT
CHROMATE OVERALL
PART NAME ASSIGNED BY CONTROLLING AGENCY
CLAMP, LOOP, PLAIN, SUPPORT, AIRCRAFT
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AS5587D07?
AS5587D07 is a CLAMP,LOOP.
What parts can replace AS5587D07?
There is 1 known substitute for AS5587D07: SAE-AS5587. Substitute compatibility should be verified for your specific system.
What is the NSN for AS5587D07?
AS5587D07 is cataloged in the U.S. Government catalog under NSN 5340-01-625-5578. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.