PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AS5587C22
AS5587C22 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: STEEL COMP 301 OR STEEL COMP 302 BAND, overall_width: 0.050 INCHES NOMINAL IN, style_designator: SINGLE LOOP, surface_treatment: PASSIVATE BAND, material_thickness: 0.028 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-054-4927, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AS5587C22
NSN: 5340-00-054-4927
FSC: 5340
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
diameter0.204 INCHES NOMINAL IN
materialSTEEL COMP 301 OR STEEL COMP 302 BAND
overall_width0.050 INCHES NOMINAL IN
style_designatorSINGLE LOOP
surface_treatmentPASSIVATE BAND
material_thickness0.028 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
loop_inside_diameter1.375 INCHES NOMINAL IN
material_document_and_classificationMIL-S-5059 MIL SPEC ALL MATERIAL RESPONSES BAND
distance_from_loop_center_to_tongue_end1.310 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole1.092 INCHES NOMINAL IN
NSN5340-00-054-4927
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AS5587C22 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: PASSIVATE BAND
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5059 MIL SPEC ALL MATERIAL RESPONSES BAND
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.310 INCHES NOMINAL IN
•
LOOP INSIDE DIAMETER: 1.375 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SINGLE LOOP
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 1.092 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 301 OR STEEL COMP 302 BAND
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTPASSIVATE BAND
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5059 MIL SPEC ALL MATERIAL RESPONSES BAND
DISTANCE FROM LOOP CENTER TO TONGUE END1.310 INCHES NOMINAL IN
LOOP INSIDE DIAMETER1.375 INCHES NOMINAL IN
OVERALL WIDTH0.050 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE LOOP
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.092 INCHES NOMINAL IN
MATERIALSTEEL COMP 301 OR STEEL COMP 302 BAND
DIAMETER0.204 INCHES NOMINAL IN
MATERIAL THICKNESS0.028 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
AN742F22Interchangeable
Same NIIN cross-reference
interchangeable
SAE-AS5587Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy AS5587C22?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AS5587C22?
AS5587C22 is a CLAMP,LOOP.
What parts can replace AS5587C22?
There are 2 known substitutes for AS5587C22: AN742F22, SAE-AS5587. Substitute compatibility should be verified for your specific system.
What is the NSN for AS5587C22?
AS5587C22 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-054-4927. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AS5587C22

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026