AS5587C10 — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

AS5587C10: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: STEEL CORROSION RESISTING BAND, overall_width: 0.375 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: PASSIVATE BAND. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-720-7749, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

AS5587C10

NSN: 5340-00-720-7749
FSC: 5340 — Hardware, Commercial
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)

SPECIFICATIONS

diameter	0.204 INCHES NOMINAL IN
material	STEEL CORROSION RESISTING BAND
overall_width	0.375 INCHES NOMINAL IN
style_designator	SINGLE LOOP
tongue_hole_type	ROUND, UNTHREADED
surface_treatment	PASSIVATE BAND
material_thickness	0.017 INCHES MINIMUM AND 0.023 INCHES MAXIMUM IN
loop_inside_diameter	0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
material_document_and_classification	MIL-S-6721 MIL SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end	0.842 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole	0.654 INCHES NOMINAL IN
NSN	5340-00-720-7749

COMPONENT DIAGRAM

KEY FEATURES

•

STYLE DESIGNATOR: SINGLE LOOP

•

MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6721 MIL SPEC SINGLE MATERIAL RESPONSE BAND

•

DIAMETER: 0.204 INCHES NOMINAL IN

•

MATERIAL THICKNESS: 0.017 INCHES MINIMUM AND 0.023 INCHES MAXIMUM IN

•

DISTANCE FROM LOOP CENTER TO TONGUE END: 0.842 INCHES NOMINAL IN

•

SURFACE TREATMENT: PASSIVATE BAND

•

TONGUE HOLE TYPE: ROUND, UNTHREADED

TECHNICAL CHARACTERISTICS

STYLE DESIGNATOR	SINGLE LOOP
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-6721 MIL SPEC SINGLE MATERIAL RESPONSE BAND
DIAMETER	0.204 INCHES NOMINAL IN
OVERALL WIDTH	0.375 INCHES NOMINAL IN
MATERIAL THICKNESS	0.017 INCHES MINIMUM AND 0.023 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END	0.842 INCHES NOMINAL IN
SURFACE TREATMENT	PASSIVATE BAND
TONGUE HOLE TYPE	ROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE	0.654 INCHES NOMINAL IN
MATERIAL	STEEL CORROSION RESISTING BAND

OTHER ITEMS IN FSC 5340 — Hardware, Commercial

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275

SUBSTITUTES & CROSS-REFERENCES 2

SAE-AS5587Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

AN742H10Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required

Ready to buy AS5587C10?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is AS5587C10?

AS5587C10 is a CLAMP,LOOP.

What parts can replace AS5587C10?

There are 2 known substitutes for AS5587C10: SAE-AS5587, AN742H10. Substitute compatibility should be verified for your specific system.

What is the NSN for AS5587C10?

AS5587C10 is cataloged in the U.S. Government catalog under NSN 5340-00-720-7749. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

AS5587C10 — CLAMP,LOOP

Request a Quote — AS5587C10