PartsTable
Technical Data Sheet
Download PDF

AS5587C04 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

AS5587C04: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.189 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN, material: STEEL COMP 321 OR STEEL COMP 348 BAND, overall_width: 0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: PASSIVATE BAND. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-471-1913, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AS5587C04
NSN: 5340-00-471-1913
FSC: 5340 — Hardware, Commercial
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
diameter0.189 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN
materialSTEEL COMP 321 OR STEEL COMP 348 BAND
overall_width0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
surface_treatmentPASSIVATE BAND
material_thickness0.017 INCHES MINIMUM AND 0.023 INCHES MAXIMUM IN
loop_inside_diameter0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
material_document_and_classificationMIL-S-6721 MIL SPEC ALL MATERIAL RESPONSES BAND
distance_from_loop_center_to_tongue_end0.615 INCHES MINIMUM AND 0.675 INCHES MAXIMUM IN
center_to_center_distance_between_loop_and_mounting_hole0.442 INCHES MINIMUM AND 0.472 INCHES MAXIMUM IN
NSN5340-00-471-1913
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AS5587C04 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6721 MIL SPEC ALL MATERIAL RESPONSES BAND
•
DIAMETER: 0.189 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.017 INCHES MINIMUM AND 0.023 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.615 INCHES MINIMUM AND 0.675 INCHES MAXIMUM IN
•
SURFACE TREATMENT: PASSIVATE BAND
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORSINGLE LOOP
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6721 MIL SPEC ALL MATERIAL RESPONSES BAND
DIAMETER0.189 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN
OVERALL WIDTH0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
MATERIAL THICKNESS0.017 INCHES MINIMUM AND 0.023 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.615 INCHES MINIMUM AND 0.675 INCHES MAXIMUM IN
SURFACE TREATMENTPASSIVATE BAND
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.442 INCHES MINIMUM AND 0.472 INCHES MAXIMUM IN
MATERIALSTEEL COMP 321 OR STEEL COMP 348 BAND
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 2
MS21103-4Reference document
Same NSN cross-reference
Reference document — Secondary reference
SAE-AS5587Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy AS5587C04?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AS5587C04?
AS5587C04 is a CLAMP,LOOP.
What parts can replace AS5587C04?
There are 2 known substitutes for AS5587C04: MS21103-4, SAE-AS5587. Substitute compatibility should be verified for your specific system.
What is the NSN for AS5587C04?
AS5587C04 is cataloged in the U.S. Government catalog under NSN 5340-00-471-1913. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AS5587C04

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.