PartsTable
Technical Data Sheet
Download PDF

AS5193W12 — CONNECTOR,MULTIPLE,FLUID PRESSUR

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

AS5193W12: CONNECTOR,MULTIPLE,FLUID PRESSUR.

CONNECTOR,MULTIPLE,FLUID PRESSUR. Key specifications include material: ALUMINUM ALLOY 7075 OVERALL, leg_length: 1.359 INCHES NOMINAL ALL ENDS IN, thread_class: 3B ALL ENDS, connection_type: THREADED INTERNAL BOSS ALL ENDS, connection_style: GASKET SEAL (BOSS) ALL ENDS, special_features: MAXIMUM PRESSURE DUE TO MATERIAL, ALUMINUM, 7075-T73. This part is cataloged in the U.S.

Government catalog under NSN 4730-01-526-9011, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AS5193W12
NSN: 4730-01-526-9011
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 7075 OVERALL
leg_length1.359 INCHES NOMINAL ALL ENDS IN
thread_class3B ALL ENDS
connection_typeTHREADED INTERNAL BOSS ALL ENDS
connection_styleGASKET SEAL (BOSS) ALL ENDS
special_featuresMAXIMUM PRESSURE DUE TO MATERIAL, ALUMINUM, 7075-T73
operating_pressure1500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
nominal_thread_size1.062 INCHES ALL ENDS IN
end_item_identificationDCN ONLY
media_for_which_designedHYDRAULIC FLUID SINGLE RESPONSE
thread_quantity_per_inch12 ALL ENDS
thread_series_designatorUNIFIED NATIONAL JOINT (UNJ) ALL ENDS
NSN4730-01-526-9011
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: AS5193W12 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CONNECTION STYLE: GASKET SEAL (BOSS) ALL ENDS
•
CONNECTION TYPE: THREADED INTERNAL BOSS ALL ENDS
•
OPERATING PRESSURE: 1500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
•
LEG LENGTH: 1.359 INCHES NOMINAL ALL ENDS IN
•
NOMINAL THREAD SIZE: 1.062 INCHES ALL ENDS IN
•
MEDIA FOR WHICH DESIGNED: HYDRAULIC FLUID SINGLE RESPONSE
•
THREAD CLASS: 3B ALL ENDS
TECHNICAL CHARACTERISTICS
CONNECTION STYLEGASKET SEAL (BOSS) ALL ENDS
CONNECTION TYPETHREADED INTERNAL BOSS ALL ENDS
OPERATING PRESSURE1500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
LEG LENGTH1.359 INCHES NOMINAL ALL ENDS IN
NOMINAL THREAD SIZE1.062 INCHES ALL ENDS IN
SPECIAL FEATURESMAXIMUM PRESSURE DUE TO MATERIAL, ALUMINUM, 7075-T73
MEDIA FOR WHICH DESIGNEDHYDRAULIC FLUID SINGLE RESPONSE
THREAD CLASS3B ALL ENDS
END ITEM IDENTIFICATIONDCN ONLY
THREAD QUANTITY PER INCH12 ALL ENDS
OTHER ITEMS IN FSC 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
4730-00-000-1895 4730-00-000-4289 4730-00-000-4445 4730-00-000-8373 4730-00-000-8897 4730-00-001-0007 4730-00-001-0008
SUBSTITUTES & CROSS-REFERENCES 2
SAE-AS4875Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
AN937W12Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy AS5193W12?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AS5193W12?
AS5193W12 is a CONNECTOR,MULTIPLE,FLUID PRESSUR.
What parts can replace AS5193W12?
There are 2 known substitutes for AS5193W12: SAE-AS4875, AN937W12. Substitute compatibility should be verified for your specific system.
What is the NSN for AS5193W12?
AS5193W12 is cataloged in the U.S. Government catalog under NSN 4730-01-526-9011. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AS5193W12

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.