PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AS5192W06
AS5192W06 ✓ Verified by PartsTable
— · HOSE FITTING
WHAT YOU NEED TO KNOW
PTFE tape on tapered threads (NPT/BSPT) JIC/AN flare connections seal metal-to-metal — no tape
NPT != BSPT — look identical, NOT interchangeable
PRODUCT OVERVIEW

CONNECTOR,MULTIPLE,FLUID PRESSUR. Key specifications include material: ALUMINUM ALLOY 2014 OR ALUMINUM ALLOY 2024 OVERALL, leg_length: 0.812 INCHES NOMINAL ALL ENDS IN, thread_class: 3B ALL ENDS, connection_type: THREADED INTERNAL BOSS ALL ENDS, connection_style: GASKET SEAL (BOSS) ALL ENDS, surface_treatment: ANODIZE OVERALL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-00-277-5026, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AS5192W06
NSN: 4730-00-277-5026
FSC: 4730
CAGE: A0126 — LEONARDO SPA HELICOPTERS DIVISION - PRODUCTION SITE (ITA)
SPECIFICATIONS
materialALUMINUM ALLOY 2014 OR ALUMINUM ALLOY 2024 OVERALL
leg_length0.812 INCHES NOMINAL ALL ENDS IN
thread_class3B ALL ENDS
connection_typeTHREADED INTERNAL BOSS ALL ENDS
connection_styleGASKET SEAL (BOSS) ALL ENDS
surface_treatmentANODIZE OVERALL
operating_pressure3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
nominal_thread_size0.562 INCHES ALL ENDS IN
thread_series_designatorUNIFIED NATIONAL JOINT FINE (UNJF) ALL ENDS
specification/standard_data88044-AN938 GOVERNMENT STANDARD
material_document_and_classificationQQ-A-225/4 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-367,T6 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-225/6,T6 FED SPEC 2ND MATERIAL RESPONSE OR QQ-A-225/6,T851 FED SPEC 2ND MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationMIL-A-8625,TYPE 2,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN4730-00-277-5026
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: AS5192W06 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CONNECTION TYPE: THREADED INTERNAL BOSS ALL ENDS
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/4 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-367,T6 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-225/6,T6 FED SPEC 2ND MATERIAL RESPONSE OR QQ-A-225/6,T851 FED SPEC 2ND MATERIAL RESPONSE OVERALL
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL JOINT FINE (UNJF) ALL ENDS
•
NOMINAL THREAD SIZE: 0.562 INCHES ALL ENDS IN
•
SPECIFICATION/STANDARD DATA: 88044-AN938 GOVERNMENT STANDARD
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625,TYPE 2,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MATERIAL: ALUMINUM ALLOY 2014 OR ALUMINUM ALLOY 2024 OVERALL
•
OPERATING PRESSURE: 3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
TECHNICAL CHARACTERISTICS (FLIS)
CONNECTION TYPETHREADED INTERNAL BOSS ALL ENDS
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-225/4 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-367,T6 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-225/6,T6 FED SPEC 2ND MATERIAL RESPONSE OR QQ-A-225/6,T851 FED SPEC 2ND MATERIAL RESPONSE OVERALL
THREAD SERIES DESIGNATORUNIFIED NATIONAL JOINT FINE (UNJF) ALL ENDS
NOMINAL THREAD SIZE0.562 INCHES ALL ENDS IN
SPECIFICATION/STANDARD DATA88044-AN938 GOVERNMENT STANDARD
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625,TYPE 2,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIALALUMINUM ALLOY 2014 OR ALUMINUM ALLOY 2024 OVERALL
OPERATING PRESSURE3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
SURFACE TREATMENTANODIZE OVERALL
THREAD CLASS3B ALL ENDS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
MS28897-16CInterchangeable
interchangeable cross-reference
interchangeable
AC3255E1610Interchangeable
interchangeable cross-reference
interchangeable
AC3255E16Interchangeable
interchangeable cross-reference
interchangeable
AS4842/1Interchangeable
interchangeable cross-reference
interchangeable
AS5198Interchangeable
interchangeable cross-reference
interchangeable
AS5198-050205Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy AS5192W06?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AS5192W06?
AS5192W06 is a CONNECTOR,MULTIPLE,FLUID PRESSUR.
What parts can replace AS5192W06?
There are 14 known substitutes for AS5192W06: MS28897-16C, AC3255E1610, AC3255E16 and 11 more. Substitute compatibility should be verified for your specific system.
Is AS5192W06 still available?
AS5192W06 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AS5192W06

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026