PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AS50195
AS50195 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN, fsc_application_data: ENGINE,RECIPROCATING,ACFT, housing_bore_diameter: 1.123 INCHES MINIMUM AND 1.127 INCHES MAXIMUM IN, sealing_element_style: ANGULAR. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-663-8736, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AS50195
NSN: 5330-00-663-8736
FSC: 5330
CAGE: 12776 — AIRCRAFT SUPPLIES (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT
case_styleSQUARE
seal_width0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
fsc_application_dataENGINE,RECIPROCATING,ACFT
housing_bore_diameter1.123 INCHES MINIMUM AND 1.127 INCHES MAXIMUM IN
sealing_element_styleANGULAR
accommodated_shaft_diameter0.625 INCHES NOMINAL IN
NSN5330-00-663-8736
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AS50195 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ACCOMMODATED SHAFT DIAMETER: 0.625 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 1.123 INCHES MINIMUM AND 1.127 INCHES MAXIMUM IN
•
CASE STYLE: SQUARE
•
FSC APPLICATION DATA: ENGINE,RECIPROCATING,ACFT
•
SEALING ELEMENT STYLE: ANGULAR
•
SEAL WIDTH: 0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
•
MATERIAL: STEEL CASE
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT DIAMETER0.625 INCHES NOMINAL IN
HOUSING BORE DIAMETER1.123 INCHES MINIMUM AND 1.127 INCHES MAXIMUM IN
CASE STYLESQUARE
FSC APPLICATION DATAENGINE,RECIPROCATING,ACFT
SEALING ELEMENT STYLEANGULAR
SEAL WIDTH0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
MATERIALSTEEL CASE
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
50195Interchangeable
interchangeable cross-reference
interchangeable
CLR24-02-5K0HMSP0RM5PCTInterchangeable
interchangeable cross-reference
interchangeable
MM29Interchangeable
interchangeable cross-reference
interchangeable
5-40-1-4Interchangeable
interchangeable cross-reference
interchangeable
5019-1Interchangeable
interchangeable cross-reference
interchangeable
876528Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy AS50195?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AS50195?
AS50195 is a SEAL,PLAIN ENCASED.
What parts can replace AS50195?
There are 10 known substitutes for AS50195: 50195, CLR24-02-5K0HMSP0RM5PCT, MM29 and 7 more. Substitute compatibility should be verified for your specific system.
Is AS50195 still available?
AS50195 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AS50195

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026