The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE CLASS Q, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, center_hole_diameter: 0.409 INCHES MINIMUM AND 0.419 INCHES MAXIMUM IN, cross-sectional_height: 0.069 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN, end_item_identification: F-18 E/F FIGHTER AIRCRAFT, specification/standard_data: 96906-MS9068/CANCELED/ GOVERNMENT STANDARD. This part is cataloged in the U.S.
Government catalog under NSN 5331-01-510-6713, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
AS3582-905
NSN:5331-01-510-6713 FSC:5331 — O-ring CAGE:0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
material
RUBBER SILICONE CLASS Q
hardness_rating
70.0 SHORE DUROMETER A NOMINAL
center_hole_diameter
0.409 INCHES MINIMUM AND 0.419 INCHES MAXIMUM IN
cross-sectional_height
0.069 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
end_item_identification
F-18 E/F FIGHTER AIRCRAFT
specification/standard_data
96906-MS9068/CANCELED/ GOVERNMENT STANDARD
criticality_code_justification
AGAV
material_document_and_classification
AMS3304 ASSN STD SINGLE MATERIAL RESPONSE
NSN
5331-01-510-6713
COMPONENT DIAGRAM
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.069 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
•
HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
•
CRITICALITY CODE JUSTIFICATION: AGAV
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS3304 ASSN STD SINGLE MATERIAL RESPONSE
•
SPECIFICATION/STANDARD DATA: 96906-MS9068/CANCELED/ GOVERNMENT STANDARD
•
CENTER HOLE DIAMETER: 0.409 INCHES MINIMUM AND 0.419 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SILICONE CLASS Q
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT
0.069 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
HARDNESS RATING
70.0 SHORE DUROMETER A NOMINAL
CRITICALITY CODE JUSTIFICATION
AGAV
MATERIAL DOCUMENT AND CLASSIFICATION
AMS3304 ASSN STD SINGLE MATERIAL RESPONSE
SPECIFICATION/STANDARD DATA
96906-MS9068/CANCELED/ GOVERNMENT STANDARD
CENTER HOLE DIAMETER
0.409 INCHES MINIMUM AND 0.419 INCHES MAXIMUM IN
END ITEM IDENTIFICATION
F-18 E/F FIGHTER AIRCRAFT
MATERIAL
RUBBER SILICONE CLASS Q
OTHER ITEMS IN FSC 5331 — O-ring
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AS3582-905?
AS3582-905 is a O-RING.
What parts can replace AS3582-905?
There are 2 known substitutes for AS3582-905: SAE-AS3582, MS3582-905. Substitute compatibility should be verified for your specific system.
What is the NSN for AS3582-905?
AS3582-905 is cataloged in the U.S. Government catalog under NSN 5331-01-510-6713. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.