PartsTable
Technical Data Sheet
Download PDF

AS3582-211 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

AS3582-211: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE CLASS Q, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, outside_diameter: 1.056 INCHES MINIMUM AND 1.092 INCHES MAXIMUM IN, center_hole_diameter: 0.790 INCHES MINIMUM AND 0.802 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-901-4407, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AS3582-211
NSN: 5331-00-901-4407
FSC: 5331 — O-ring
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
materialRUBBER SILICONE CLASS Q
hardness_rating70.0 SHORE DUROMETER A NOMINAL
outside_diameter1.056 INCHES MINIMUM AND 1.092 INCHES MAXIMUM IN
center_hole_diameter0.790 INCHES MINIMUM AND 0.802 INCHES MAXIMUM IN
elongation_percentage125 MAXIMUM
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
end_item_identification2320-01-097-0248,2320-01-097-0249,2320-01-100-7672,2320-01-097-0260,2320-01-195-7641, HEMTT FAMILY (HEAVY EXPANDED MOBILITY TACTICAL TRUCKS);2320-01-097-0260 HIAB CRANE (HEMTT)
NSN5331-00-901-4407
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AS3582-211 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 1.056 INCHES MINIMUM AND 1.092 INCHES MAXIMUM IN
•
HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
CENTER HOLE DIAMETER: 0.790 INCHES MINIMUM AND 0.802 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SILICONE CLASS Q
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
OUTSIDE DIAMETER1.056 INCHES MINIMUM AND 1.092 INCHES MAXIMUM IN
HARDNESS RATING70.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE125 MAXIMUM
CENTER HOLE DIAMETER0.790 INCHES MINIMUM AND 0.802 INCHES MAXIMUM IN
END ITEM IDENTIFICATION2320-01-097-0248,2320-01-097-0249,2320-01-100-7672,2320-01-097-0260,2320-01-195-7641, HEMTT FAMILY (HEAVY EXPANDED MOBILITY TACTICAL TRUCKS);2320-01-097-0260 HIAB CRANE (HEMTT)
MATERIALRUBBER SILICONE CLASS Q
SUBSTITUTES & CROSS-REFERENCES 7
SAE-AS3582Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
2-211 S604-70Reference document
Same NSN cross-reference
Reference document — Secondary reference
5330009014407Reference document
Same NSN cross-reference
Reference document — Informative reference only
211WS714177Reference document
Same NSN cross-reference
Reference document — Secondary reference
MS9068-211Reference document
Same NSN cross-reference
Reference document — Secondary reference
ARP568-211ZZR76 5CL2BGR70Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy AS3582-211?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AS3582-211?
AS3582-211 is a O-RING.
What parts can replace AS3582-211?
There are 7 known substitutes for AS3582-211: SAE-AS3582, 2-211 S604-70, 5330009014407 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AS3582-211?
AS3582-211 is cataloged in the U.S. Government catalog under NSN 5331-00-901-4407. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AS3582-211

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.