AS3581-016 — O-RING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

AS3581-016: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER POLYMETHYLENE-PERFLUOROALKYLENE CLASS FKM, temp_rating: -200.0 FAHRENHEIT AND 500.0 FAHRENHEIT DEGF, hardness_rating: 85.0 SHORE DUROMETER A MINIMUM AND 95.0 SHORE DUROMETER A MAXIMUM, center_hole_diameter: 0.609 INCHES MINIMUM AND 0.619 INCHES MAXIMUM IN, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN, end_item_identification: SD PIPE ASSY. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-528-5236, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

AS3581-016

NSN: 5331-00-528-5236
NIINs: 005285236, 014832242
FSC: 5331 — O-ring
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)

SPECIFICATIONS

material	RUBBER POLYMETHYLENE-PERFLUOROALKYLENE CLASS FKM
temp_rating	-200.0 FAHRENHEIT AND 500.0 FAHRENHEIT DEGF
hardness_rating	85.0 SHORE DUROMETER A MINIMUM AND 95.0 SHORE DUROMETER A MAXIMUM
center_hole_diameter	0.609 INCHES MINIMUM AND 0.619 INCHES MAXIMUM IN
cross-sectional_height	0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
end_item_identification	SD PIPE ASSY
criticality_code_justification	MATT
material_document_and_classification	SAE-AMS7259 NATIONAL SPEC SINGLE MATERIAL RESPONSE
NSN	5331-00-528-5236

COMPONENT DIAGRAM

KEY FEATURES

•

TEMP RATING: -20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF

•

CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN

•

OUTSIDE DIAMETER: 0.754 INCHES NOMINAL IN

•

HARDNESS RATING: 90.0 SHORE DUROMETER A NOMINAL

•

CENTER HOLE DIAMETER: 0.605 INCHES MINIMUM AND 0.623 INCHES MAXIMUM IN

•

MATERIAL: RUBBER FLUOROCARBON CLASS FPM

TECHNICAL CHARACTERISTICS

TEMP RATING	-20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT	0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
OUTSIDE DIAMETER	0.754 INCHES NOMINAL IN
HARDNESS RATING	90.0 SHORE DUROMETER A NOMINAL
CENTER HOLE DIAMETER	0.605 INCHES MINIMUM AND 0.623 INCHES MAXIMUM IN
MATERIAL	RUBBER FLUOROCARBON CLASS FPM

SUBSTITUTES & CROSS-REFERENCES 9

SAE-AS3581Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

1736932Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

513 CZ-016Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

M83248/2-016Reference document

Same NSN cross-reference

Reference document — Secondary reference

AMS-7259Reference document

Same NSN cross-reference

Reference document — Secondary reference

5331PL1279404Reference document

Same NSN cross-reference

Reference document — Informative reference only

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required

Ready to buy AS3581-016?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is AS3581-016?

AS3581-016 is a O-RING.

What parts can replace AS3581-016?

There are 9 known substitutes for AS3581-016: SAE-AS3581, 1736932, 513 CZ-016 and 6 more. Substitute compatibility should be verified for your specific system.

What is the NSN for AS3581-016?

AS3581-016 is cataloged in the U.S. Government catalog under NSN 5331-00-528-5236. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

AS3581-016 — O-RING

Request a Quote — AS3581-016