PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AS3414-09
AS3414-09 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The BOLT,MACHINE is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY 718 OVERALL, head_style: HEXAGON, grip_length: 0.0250 INCHES MINIMUM IN, head_height: 0.1250 INCHES MINIMUM AND 0.1400 INCHES MAXIMUM IN, thread_class: 3A A, chamfer_angle: 45.0 DEGREES NOMINAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-01-661-1124, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AS3414-09
NSN: 5306-01-661-1124
FSC: 5306
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
materialNICKEL ALLOY 718 OVERALL
head_styleHEXAGON
grip_length0.0250 INCHES MINIMUM IN
head_height0.1250 INCHES MINIMUM AND 0.1400 INCHES MAXIMUM IN
thread_class3A A
chamfer_angle45.0 DEGREES NOMINAL
grip_diameter0.2220 INCHES MINIMUM AND 0.2320 INCHES MAXIMUM IN
thread_length0.6530 INCHES MINIMUM AND 0.6730 INCHES MAXIMUM IN
fastener_length0.6780 INCHES MINIMUM AND 0.6980 INCHES MAXIMUM IN
special_featuresNEXT HIGHER ASSEMBLY IS LIFTFAN ASSEMBLY MODULE
thread_directionRIGHT-HAND
width_between_flats0.4290 INCHES MINIMUM AND 0.4390 INCHES MAXIMUM IN
NSN5306-01-661-1124
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: AS3414-09 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD CLASS: 3A A
•
HEAD STYLE: HEXAGON
•
EXTENDED WASHER DIAMETER: 0.4290 INCHES MINIMUM AND 0.4390 INCHES MAXIMUM IN
•
CHAMFER ANGLE: 45.0 DEGREES NOMINAL
•
GRIP LENGTH: 0.0250 INCHES MINIMUM IN
•
THREAD LENGTH: 0.6530 INCHES MINIMUM AND 0.6730 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESNEXT HIGHER ASSEMBLY IS LIFTFAN ASSEMBLY MODULE
THREAD CLASS3A A
HEAD STYLEHEXAGON
EXTENDED WASHER DIAMETER0.4290 INCHES MINIMUM AND 0.4390 INCHES MAXIMUM IN
END ITEM IDENTIFICATIONF-35B LIFT FAN
CHAMFER ANGLE45.0 DEGREES NOMINAL
GRIP LENGTH0.0250 INCHES MINIMUM IN
THREAD LENGTH0.6530 INCHES MINIMUM AND 0.6730 INCHES MAXIMUM IN
GRIP DIAMETER0.2220 INCHES MINIMUM AND 0.2320 INCHES MAXIMUM IN
THREAD SERIES DESIGNATORUNIFIED NATIONAL JOINT FINE (UNJF)
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
AS3414Upgraded Successor
successor cross-reference
successor
AS3414-13Upgraded Successor
successor cross-reference
successor
AS3414-11Upgraded Successor
successor cross-reference
successor
AS3414-07Upgraded Successor
successor cross-reference
successor
SM-D-794137Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy AS3414-09?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AS3414-09?
AS3414-09 is a BOLT,MACHINE.
What parts can replace AS3414-09?
There are 5 known substitutes for AS3414-09: AS3414, AS3414-13, AS3414-11 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AS3414-09?
AS3414-09 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-01-661-1124. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AS3414-09

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026