AS3209-128CPCP — O-RING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

AS3209-128CPCP: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER, center_hole_diameter: 1.475 INCHES MINIMUM AND 1.499 INCHES MAXIMUM IN, cross-sectional_height: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN, end_item_identification: MANIFOLD,VALVE, specification/standard_data: 81349-MIL-R-83248/1 GOVERNMENT SPECIFICATION, departure_from_cited_document: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-324-5267, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

AS3209-128CPCP

NSN: 5331-01-324-5267
FSC: 5331 — O-ring
CAGE: 03950 — NAVAL INVENTORY CONTROL POINT MECHANICSBURG (USA)

SPECIFICATIONS

material	RUBBER
center_hole_diameter	1.475 INCHES MINIMUM AND 1.499 INCHES MAXIMUM IN
cross-sectional_height	0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
end_item_identification	MANIFOLD,VALVE
specification/standard_data	81349-MIL-R-83248/1 GOVERNMENT SPECIFICATION
departure_from_cited_document	CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
criticality_code_justification	ZZZW
NSN	5331-01-324-5267

COMPONENT DIAGRAM

KEY FEATURES

•

CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN

•

CRITICALITY CODE JUSTIFICATION: ZZZW

•

SPECIFICATION/STANDARD DATA: 81349-MIL-R-83248/1 GOVERNMENT SPECIFICATION

•

DEPARTURE FROM CITED DOCUMENT: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D

•

CENTER HOLE DIAMETER: 1.475 INCHES MINIMUM AND 1.499 INCHES MAXIMUM IN

•

MATERIAL: RUBBER

TECHNICAL CHARACTERISTICS

CROSS-SECTIONAL HEIGHT	0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
CRITICALITY CODE JUSTIFICATION	ZZZW
SPECIFICATION/STANDARD DATA	81349-MIL-R-83248/1 GOVERNMENT SPECIFICATION
DEPARTURE FROM CITED DOCUMENT	CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
CENTER HOLE DIAMETER	1.475 INCHES MINIMUM AND 1.499 INCHES MAXIMUM IN
END ITEM IDENTIFICATION	MANIFOLD,VALVE
MATERIAL	RUBBER

SUBSTITUTES & CROSS-REFERENCES 8

PL2850-0030 FIND 53CPSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

AMS7276Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

MIL-R-83248/1-128Reference document

Same NSN cross-reference

Reference document — Secondary reference

5331PL1718541Reference document

Same NSN cross-reference

Reference document — Informative reference only

M83248/1-128Reference document

Same NSN cross-reference

Reference document — Secondary reference

PL2850-0030 FIND 53Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy AS3209-128CPCP?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is AS3209-128CPCP?

AS3209-128CPCP is a O-RING.

What parts can replace AS3209-128CPCP?

There are 8 known substitutes for AS3209-128CPCP: PL2850-0030 FIND 53CP, AMS7276, MIL-R-83248/1-128 and 5 more. Substitute compatibility should be verified for your specific system.

What is the NSN for AS3209-128CPCP?

AS3209-128CPCP is cataloged in the U.S. Government catalog under NSN 5331-01-324-5267. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

AS3209-128CPCP — O-RING

Request a Quote — AS3209-128CPCP