AS3209-020 — PACKING,PREFORMED,A

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

AS3209-020: PACKING,PREFORMED,A.

The PACKING,PREFORMED,A is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.989 INCHES MINIMUM AND 1.019 INCHES MAXIMUM IN, center_hole_diameter: 0.855 INCHES MINIMUM AND 0.873 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-166-1001, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

AS3209-020

NSN: 5331-00-166-1001
NIINs: 001661001, 014638826, 015348877
FSC: 5331 — O-ring
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)

SPECIFICATIONS

material	RUBBER FLUOROCARBON CLASS FPM
hardness_rating	75.0 SHORE DUROMETER A NOMINAL
outside_diameter	0.989 INCHES MINIMUM AND 1.019 INCHES MAXIMUM IN
center_hole_diameter	0.855 INCHES MINIMUM AND 0.873 INCHES MAXIMUM IN
elongation_percentage	125 MAXIMUM
cross-sectional_height	0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN	5331-00-166-1001

COMPONENT DIAGRAM

KEY FEATURES

•

CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN

•

OUTSIDE DIAMETER: 0.989 INCHES MINIMUM AND 1.019 INCHES MAXIMUM IN

•

HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL

•

ELONGATION PERCENTAGE: 125 MAXIMUM

•

CENTER HOLE DIAMETER: 0.855 INCHES MINIMUM AND 0.873 INCHES MAXIMUM IN

•

MATERIAL: RUBBER FLUOROCARBON CLASS FPM

TECHNICAL CHARACTERISTICS

CROSS-SECTIONAL HEIGHT	0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
OUTSIDE DIAMETER	0.989 INCHES MINIMUM AND 1.019 INCHES MAXIMUM IN
HARDNESS RATING	75.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE	125 MAXIMUM
CENTER HOLE DIAMETER	0.855 INCHES MINIMUM AND 0.873 INCHES MAXIMUM IN
MATERIAL	RUBBER FLUOROCARBON CLASS FPM

SUBSTITUTES & CROSS-REFERENCES 9

M83248/1-020Reference document

Same NSN cross-reference

Reference document — Secondary reference

3634-96-11-90Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

PL-D200660E001 REV J IT NO 22Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

10117056Reference document

Same NSN cross-reference

Reference document — Informative reference only

AS3085-020AMS 7280Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

PL-D200661E001 REV J IT NO 22Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

No demilitarization required

Ready to buy AS3209-020?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is AS3209-020?

AS3209-020 is a PACKING,PREFORMED,A.

What parts can replace AS3209-020?

There are 9 known substitutes for AS3209-020: M83248/1-020, 3634-96-11-90, PL-D200660E001 REV J IT NO 22 and 6 more. Substitute compatibility should be verified for your specific system.

What is the NSN for AS3209-020?

AS3209-020 is cataloged in the U.S. Government catalog under NSN 5331-00-166-1001. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

AS3209-020 — PACKING,PREFORMED,A

Request a Quote — AS3209-020