PartsTable
Technical Data Sheet
Download PDF

AS3124-06 — PIN,TAPERED,PLAIN

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

AS3124-06: PIN,TAPERED,PLAIN.

The PIN,TAPERED,PLAIN is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: ALUMINUM ALLOY 2024 OVERALL, pin_taper: 0.250 PER FOOT IN INCHES, surface_finish: 0.063 MICROINCHES ALL OTHER SURFACES, first_end_style: SQUARE W/THRU HOLE, surface_treatment: CHROMATE OVERALL, first_end_location: BOTH ENDS. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-147-8787, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AS3124-06
NSN: 5315-01-147-8787
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2024 OVERALL
pin_taper0.250 PER FOOT IN INCHES
surface_finish0.063 MICROINCHES ALL OTHER SURFACES
first_end_styleSQUARE W/THRU HOLE
surface_treatmentCHROMATE OVERALL
first_end_locationBOTH ENDS
large_end_diameter0.2118 INCHES MINIMUM AND 0.2127 INCHES MAXIMUM IN
pin_overall_length0.153 INCHES MINIMUM AND 0.167 INCHES MAXIMUM IN
material_document_and_classificationAMS 4120, T4 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
second_end_relationship_with_first_endIDENTICAL
surface_treatment_document_and_classificationMIL-C-5541, DYED YELLOW MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5315-01-147-8787
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: AS3124-06 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 0.063 MICROINCHES ALL OTHER SURFACES
•
FIRST END LOCATION: BOTH ENDS
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-5541, DYED YELLOW MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
LARGE END DIAMETER: 0.2118 INCHES MINIMUM AND 0.2127 INCHES MAXIMUM IN
•
FIRST END STYLE: SQUARE W/THRU HOLE
•
PIN TAPER: 0.250 PER FOOT IN INCHES
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 4120, T4 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
PIN OVERALL LENGTH: 0.153 INCHES MINIMUM AND 0.167 INCHES MAXIMUM IN
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
SURFACE FINISH0.063 MICROINCHES ALL OTHER SURFACES
FIRST END LOCATIONBOTH ENDS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-5541, DYED YELLOW MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
LARGE END DIAMETER0.2118 INCHES MINIMUM AND 0.2127 INCHES MAXIMUM IN
FIRST END STYLESQUARE W/THRU HOLE
PIN TAPER0.250 PER FOOT IN INCHES
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 4120, T4 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
PIN OVERALL LENGTH0.153 INCHES MINIMUM AND 0.167 INCHES MAXIMUM IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
SURFACE TREATMENTCHROMATE OVERALL
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 3
J108P54BReference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
PLGA250401ASame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
PLGA2504010Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy AS3124-06?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AS3124-06?
AS3124-06 is a PIN,TAPERED,PLAIN.
What parts can replace AS3124-06?
There are 3 known substitutes for AS3124-06: J108P54B, PLGA250401A, PLGA2504010. Substitute compatibility should be verified for your specific system.
What is the NSN for AS3124-06?
AS3124-06 is cataloged in the U.S. Government catalog under NSN 5315-01-147-8787. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AS3124-06

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.