PartsTable
Technical Data Sheet
AS3085-238 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER POLYMETHYLENE-PERFLUOROALKYLENE CLASS FKM, temp_rating: -5.0 CELSIUS AND 205.0 CELSIUS DEGC, hardness_rating: 70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM, center_hole_diameter: 3.460 INCHES MINIMUM AND 3.508 INCHES MAXIMUM IN, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN, end_item_identification: HERCULES C130J, FIXED WING AIRCRAFT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-477-3050, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AS3085-238
NSN: 5331-01-477-3050
FSC: 5331 — O-RING
CAGE: 81343 — SOCIETY OF AUTOMOTIVE ENGINEERS INC (USA)
SPECIFICATIONS
materialRUBBER POLYMETHYLENE-PERFLUOROALKYLENE CLASS FKM
temp_rating-5.0 CELSIUS AND 205.0 CELSIUS DEGC
hardness_rating70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM
center_hole_diameter3.460 INCHES MINIMUM AND 3.508 INCHES MAXIMUM IN
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
end_item_identificationHERCULES C130J, FIXED WING AIRCRAFT
criticality_code_justificationAGAV
material_document_and_classificationSAE AMS7276 ASSN STD SINGLE MATERIAL RESPONSE OR SAE AMS7280 ASSN STD SINGLE MATERIAL RESPONSE
part_name_assigned_by_controlling_agency(INAVY)PACKING,AIRCRAFT,MA
NSN5331-01-477-3050
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AS3085-238 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
TEMP RATING: -5.0 CELSIUS AND 205.0 CELSIUS DEGC
MATERIAL: RUBBER POLYMETHYLENE-PERFLUOROALKYLENE CLASS FKM
TECHNICAL CHARACTERISTICS (FLIS)
END ITEM IDENTIFICATIONHERCULES C130J, FIXED WING AIRCRAFT
TEMP RATING-5.0 CELSIUS AND 205.0 CELSIUS DEGC
MATERIALRUBBER POLYMETHYLENE-PERFLUOROALKYLENE CLASS FKM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
AS3209-238Interchangeable
interchangeable cross-reference
interchangeable
AS3085-238Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy AS3085-238?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AS3085-238?
AS3085-238 is a O-RING.
What parts can replace AS3085-238?
There are 2 known substitutes for AS3085-238: AS3209-238, AS3085-238. Substitute compatibility should be verified for your specific system.
What is the NSN for AS3085-238?
AS3085-238 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-477-3050. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AS3085-238