PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AS3085-111
AS3085-111 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED,A is a the manufacturer industrial component. Key specifications include color: BROWN, material: RUBBER POLYMETHYLENE-PERFLUOROALKYLENE CLASS FKM OVERALL, temp_rating: -5.0 CELSIUS AND 205.0 CELSIUS DEGC, hardness_rating: 70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM OVERALL, operating_medium: FLUID, HIGH TEMPERATURE, peripheral_diameter: 0.619 INCHES MINIMUM AND 0.641 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-290-9410, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AS3085-111
NSN: 5330-01-290-9410
FSC: 5330
CAGE: 81343 — SOCIETY OF AUTOMOTIVE ENGINEERS INC (USA)
SPECIFICATIONS
colorBROWN
materialRUBBER POLYMETHYLENE-PERFLUOROALKYLENE CLASS FKM OVERALL
temp_rating-5.0 CELSIUS AND 205.0 CELSIUS DEGC
hardness_rating70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM OVERALL
operating_mediumFLUID, HIGH TEMPERATURE
peripheral_diameter0.619 INCHES MINIMUM AND 0.641 INCHES MAXIMUM IN
center_hole_diameter0.419 INCHES MINIMUM AND 0.429 INCHES MAXIMUM IN
cross-sectional_height0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
type/model_designationRB199MK101/103/104
end_item_identification2840-99-645-9394; 2840-99-645-9395; 2840-99-766-0507; 2840-99-766-0508
cross-sectional_shape_styleO-RING
cross_section_outside_diameter0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
NSN5330-01-290-9410
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AS3085-111 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RELATIONSHIP TO SIMILAR EQUIPMENT: SIMILAR TO NSN 5330-01-075-6151
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: AS DIFF BY SPEC K2617 HTE7300 PERFORMANCE RQMT TORNADO ACFT ENGINE MODEL RB199
•
COLOR: BROWN
•
CENTER HOLE DIAMETER: 0.419 INCHES MINIMUM AND 0.429 INCHES MAXIMUM IN
•
HARDNESS RATING: 70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM OVERALL
•
OPERATING MEDIUM: FLUID, HIGH TEMPERATURE
•
MATERIAL: RUBBER POLYMETHYLENE-PERFLUOROALKYLENE CLASS FKM OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
RELATIONSHIP TO SIMILAR EQUIPMENTSIMILAR TO NSN 5330-01-075-6151
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICSAS DIFF BY SPEC K2617 HTE7300 PERFORMANCE RQMT TORNADO ACFT ENGINE MODEL RB199
COLORBROWN
CENTER HOLE DIAMETER0.419 INCHES MINIMUM AND 0.429 INCHES MAXIMUM IN
HARDNESS RATING70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM OVERALL
OPERATING MEDIUMFLUID, HIGH TEMPERATURE
MATERIALRUBBER POLYMETHYLENE-PERFLUOROALKYLENE CLASS FKM OVERALL
TYPE/MODEL DESIGNATIONRB199MK101/103/104
PERIPHERAL DIAMETER0.619 INCHES MINIMUM AND 0.641 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
AS568-111NMIL-R-83248 TY1 CL1Interchangeable
interchangeable cross-reference
interchangeable
RS900W&111Interchangeable
interchangeable cross-reference
interchangeable
MS17413-111Interchangeable
interchangeable cross-reference
interchangeable
M83248/1-111Interchangeable
interchangeable cross-reference
interchangeable
5331PL0140374Interchangeable
interchangeable cross-reference
interchangeable
AS3209-111Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy AS3085-111?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AS3085-111?
AS3085-111 is a PACKING,PREFORMED,A.
What parts can replace AS3085-111?
There are 8 known substitutes for AS3085-111: AS568-111NMIL-R-83248 TY1 CL1, RS900W&111, MS17413-111 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AS3085-111?
AS3085-111 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-290-9410. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AS3085-111

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026