PartsTable
Technical Data Sheet
Download PDF

AS29513-135 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

AS29513-135: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include special_features: WIDTH DIA IS 0.103 INCHES NOMINAL IN, center_hole_diameter: 1.925 INCHES NOMINAL IN, end_item_identification: 2340-01-511-7783, ASSAULT BREACHER VEHICLE, part_name_assigned_by_controlling_agency: PACKING, PREFORMED, HYDROCARBON FUEL RESISTANT O-RING. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-548-9569, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AS29513-135
NSN: 5331-01-548-9569
FSC: 5331 — O-ring
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
special_featuresWIDTH DIA IS 0.103 INCHES NOMINAL IN
center_hole_diameter1.925 INCHES NOMINAL IN
end_item_identification2340-01-511-7783, ASSAULT BREACHER VEHICLE
specification/standard_data81343 - SAE AS 29513 DTD 1 MAR 2001 WHICH SUPERSEDED MS29513 REV C 16 SEP 1966 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
part_name_assigned_by_controlling_agencyPACKING, PREFORMED, HYDROCARBON FUEL RESISTANT O-RING
NSN5331-01-548-9569
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AS29513-135 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SPECIFICATION/STANDARD DATA: 81343 - SAE AS 29513 DTD 1 MAR 2001 WHICH SUPERSEDED MS29513 REV C 16 SEP 1966 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
•
CENTER HOLE DIAMETER: 1.925 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SPECIFICATION/STANDARD DATA81343 - SAE AS 29513 DTD 1 MAR 2001 WHICH SUPERSEDED MS29513 REV C 16 SEP 1966 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SPECIAL FEATURESWIDTH DIA IS 0.103 INCHES NOMINAL IN
CENTER HOLE DIAMETER1.925 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYPACKING, PREFORMED, HYDROCARBON FUEL RESISTANT O-RING
END ITEM IDENTIFICATION2340-01-511-7783, ASSAULT BREACHER VEHICLE
OTHER ITEMS IN FSC 5331 — O-ring
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5331-00-001-1971 5331-00-001-1979 5331-00-001-3904 5331-00-001-3905 5331-00-001-3906 5331-00-001-3908 5331-00-001-3923 5331-00-001-3924
SUBSTITUTES & CROSS-REFERENCES 1
SAE-AS29513Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy AS29513-135?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AS29513-135?
AS29513-135 is a O-RING.
What parts can replace AS29513-135?
There is 1 known substitute for AS29513-135: SAE-AS29513. Substitute compatibility should be verified for your specific system.
What is the NSN for AS29513-135?
AS29513-135 is cataloged in the U.S. Government catalog under NSN 5331-01-548-9569. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AS29513-135