PartsTable
Technical Data Sheet
PartsTable / O-RING / AS29513-128
AS29513-128 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, temp_rating: -70.0 FAHRENHEIT AND 180.0 FAHRENHEIT DEGF, outside_diameter: 1.675 INCHES MINIMUM AND 1.711 INCHES MAXIMUM IN, center_hole_diameter: 1.481 INCHES MINIMUM AND 1.493 INCHES MAXIMUM IN, cross-sectional_height: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-265-1095, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AS29513-128
NSN: 5331-00-265-1095
FSC: 5331 — O-RING
CAGE: 81343 — SOCIETY OF AUTOMOTIVE ENGINEERS INC (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
temp_rating-70.0 FAHRENHEIT AND 180.0 FAHRENHEIT DEGF
outside_diameter1.675 INCHES MINIMUM AND 1.711 INCHES MAXIMUM IN
center_hole_diameter1.481 INCHES MINIMUM AND 1.493 INCHES MAXIMUM IN
cross-sectional_height0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
NSN5331-00-265-1095
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AS29513-128 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -70.0 FAHRENHEIT AND 180.0 FAHRENHEIT DEGF
•
CENTER HOLE DIAMETER: 1.481 INCHES MINIMUM AND 1.493 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 1.675 INCHES MINIMUM AND 1.711 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
TEMP RATING-70.0 FAHRENHEIT AND 180.0 FAHRENHEIT DEGF
CENTER HOLE DIAMETER1.481 INCHES MINIMUM AND 1.493 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
OUTSIDE DIAMETER1.675 INCHES MINIMUM AND 1.711 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 32
11-1-28Interchangeable
interchangeable cross-reference
interchangeable
A-020SR822-60Interchangeable
interchangeable cross-reference
interchangeable
GS570EM020Interchangeable
interchangeable cross-reference
interchangeable
MS29513-020Interchangeable
interchangeable cross-reference
interchangeable
MS29513-021Interchangeable
interchangeable cross-reference
interchangeable
3113858Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy AS29513-128?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AS29513-128?
AS29513-128 is a O-RING.
What parts can replace AS29513-128?
There are 32 known substitutes for AS29513-128: 11-1-28, A-020SR822-60, GS570EM020 and 29 more. Substitute compatibility should be verified for your specific system.
Is AS29513-128 still available?
AS29513-128 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AS29513-128

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026