PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AS24463
AS24463 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL COMP E52100 OR STEEL COMP 8620 OR STEEL OR STEEL COMP E50100 OR STEEL COMP E51100 OVERALL, bore_diameter: 0.3118 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM IN, alignment_type: SELF-ALIGNING, surface_finish: GROUND, inner_ring_width: 0.4320 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM IN, outer_ring_width: 0.3390 INCHES MINIMUM AND 0.3440 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-227-2863, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AS24463
NSN: 3110-00-227-2863
FSC: 3110
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
materialSTEEL COMP E52100 OR STEEL COMP 8620 OR STEEL OR STEEL COMP E50100 OR STEEL COMP E51100 OVERALL
bore_diameter0.3118 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM IN
alignment_typeSELF-ALIGNING
surface_finishGROUND
inner_ring_width0.4320 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM IN
outer_ring_width0.3390 INCHES MINIMUM AND 0.3440 INCHES MAXIMUM IN
special_featuresOIL HOLE AND GROOVE IN OUTER RING
style_designatorAIRFRAME, HARDENED AND GROUND, NON-SEPARABLE
features_providedALIGNING RING
surface_treatmentCADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
lubrication_materialGREASE
self-alignment_locationEXTERNAL
NSN3110-00-227-2863
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: AS24463 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
LUBRICATION MATERIAL: GREASE
•
FEATURES PROVIDED: ALIGNING RING
•
ALIGNMENT TYPE: SELF-ALIGNING
•
MATERIAL: STEEL COMP E52100 OR STEEL COMP 8620 OR STEEL OR STEEL COMP E50100 OR STEEL COMP E51100 OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-7420 MIL SPEC 1ST MATERIAL RESPONSE OR 66 FED STD 1ST MATERIAL RESPONSE OR MIL-S-8690 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-7493 MIL SPEC 3RD MATERIAL RESPONSE OR QQ-S-624 FED SPEC 3RD MATERIAL RESPONSE OR QQ-S-633 FED SPEC 3RD MATERIAL RESPONSE OR 66 FED STD 4TH MATERIAL RESPONSE OR 66 FED STD 5TH MATERIAL RESPONSE OVERALL
•
SURFACE TREATMENT: CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
TECHNICAL CHARACTERISTICS (FLIS)
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
LUBRICATION MATERIALGREASE
FEATURES PROVIDEDALIGNING RING
SPECIAL FEATURESOIL HOLE AND GROOVE IN OUTER RING
ALIGNMENT TYPESELF-ALIGNING
MATERIALSTEEL COMP E52100 OR STEEL COMP 8620 OR STEEL OR STEEL COMP E50100 OR STEEL COMP E51100 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-7420 MIL SPEC 1ST MATERIAL RESPONSE OR 66 FED STD 1ST MATERIAL RESPONSE OR MIL-S-8690 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-7493 MIL SPEC 3RD MATERIAL RESPONSE OR QQ-S-624 FED SPEC 3RD MATERIAL RESPONSE OR QQ-S-633 FED SPEC 3RD MATERIAL RESPONSE OR 66 FED STD 4TH MATERIAL RESPONSE OR 66 FED STD 5TH MATERIAL RESPONSE OVERALL
SURFACE TREATMENTCADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-3278 MIL SPEC SINGLE MATERIAL RESPONSE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
BACB10CE5Interchangeable
interchangeable cross-reference
interchangeable
5NBE717ZP2CInterchangeable
interchangeable cross-reference
interchangeable
MS24463-5GInterchangeable
interchangeable cross-reference
interchangeable
5043Interchangeable
interchangeable cross-reference
interchangeable
E61-00AInterchangeable
interchangeable cross-reference
interchangeable
60020-57Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy AS24463?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AS24463?
AS24463 is a BEARING,ROLLER,NEEDLE.
What parts can replace AS24463?
There are 23 known substitutes for AS24463: BACB10CE5, 5NBE717ZP2C, MS24463-5G and 20 more. Substitute compatibility should be verified for your specific system.
Is AS24463 still available?
AS24463 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AS24463

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026