PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AS2294-3
AS2294-3 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.310 INCHES NOMINAL IN, length: 0.200 INCHES NOMINAL IN, hole_diameter: 0.094 INCHES NOMINAL IN, overall_height: 0.690 INCHES NOMINAL IN, mounting_method: COUNTERSUNK HOLE, material_thickness: 0.018 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-029-4563, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AS2294-3
NSN: 5340-01-029-4563
FSC: 5340
CAGE: K1207 — BROWN BROTHERS ENGINEERING (GBR)
SPECIFICATIONS
width0.310 INCHES NOMINAL IN
length0.200 INCHES NOMINAL IN
hole_diameter0.094 INCHES NOMINAL IN
overall_height0.690 INCHES NOMINAL IN
mounting_methodCOUNTERSUNK HOLE
material_thickness0.018 INCHES NOMINAL IN
loop/holding_dimension0.470 INCHES NOMINAL IN
NSN5340-01-029-4563
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AS2294-3 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING METHOD: COUNTERSUNK HOLE
•
LOOP/HOLDING DIMENSION: 0.470 INCHES NOMINAL IN
•
LENGTH: 0.200 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.018 INCHES NOMINAL IN
•
WIDTH: 0.310 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.094 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL HEIGHT0.690 INCHES NOMINAL IN
MOUNTING METHODCOUNTERSUNK HOLE
LOOP/HOLDING DIMENSION0.470 INCHES NOMINAL IN
LENGTH0.200 INCHES NOMINAL IN
MATERIAL THICKNESS0.018 INCHES NOMINAL IN
WIDTH0.310 INCHES NOMINAL IN
HOLE DIAMETER0.094 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
801Upgraded Successor
successor cross-reference
successor
60-001Upgraded Successor
successor cross-reference
successor
NON24329Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy AS2294-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AS2294-3?
AS2294-3 is a CLIP,SPRING TENSION.
What parts can replace AS2294-3?
There are 3 known substitutes for AS2294-3: 801, 60-001, NON24329. Substitute compatibility should be verified for your specific system.
What is the NSN for AS2294-3?
AS2294-3 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-029-4563. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AS2294-3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026