PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AS21919WDG33
AS21919WDG33 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: RUBBER CHLOROPRENE CLASS CR CUSHION, overall_width: 0.500 INCHES NOMINAL IN, special_features: INCLUDES CUSION, style_designator: SINGLE LOOP, material_thickness: 0.062 INCHES NOMINAL IN, loop_inside_diameter: 2.047 INCHES MINIMUM AND 2.077 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-618-1177, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AS21919WDG33
NSN: 5340-01-618-1177
FSC: 5340
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR CUSHION
overall_width0.500 INCHES NOMINAL IN
special_featuresINCLUDES CUSION
style_designatorSINGLE LOOP
material_thickness0.062 INCHES NOMINAL IN
loop_inside_diameter2.047 INCHES MINIMUM AND 2.077 INCHES MAXIMUM IN
end_item_identificationB-1
distance_from_loop_center_to_tongue_end1.734 INCHES MINIMUM AND 1.764 INCHES MAXIMUM IN
part_name_assigned_by_controlling_agencyCLAMP, LOOP TYPE, CUSIONED, SUPPORT
center_to_center_distance_between_loop_and_mounting_hole1.516 INCHES MINIMUM AND 1.546 INCHES MAXIMUM IN
NSN5340-01-618-1177
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AS21919WDG33 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER CHLOROPRENE CLASS CR CUSHION
•
LOOP INSIDE DIAMETER: 2.047 INCHES MINIMUM AND 2.077 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.734 INCHES MINIMUM AND 1.764 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.062 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 1.516 INCHES MINIMUM AND 1.546 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER CHLOROPRENE CLASS CR CUSHION
PART NAME ASSIGNED BY CONTROLLING AGENCYCLAMP, LOOP TYPE, CUSIONED, SUPPORT
SPECIAL FEATURESINCLUDES CUSION
LOOP INSIDE DIAMETER2.047 INCHES MINIMUM AND 2.077 INCHES MAXIMUM IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.734 INCHES MINIMUM AND 1.764 INCHES MAXIMUM IN
MATERIAL THICKNESS0.062 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.516 INCHES MINIMUM AND 1.546 INCHES MAXIMUM IN
END ITEM IDENTIFICATIONB-1
MATERIALALUMINUM BAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
MIL-DTL-8603Upgraded Successor
successor cross-reference
successor
TA1716WS4Upgraded Successor
successor cross-reference
successor
MS21919WG4Upgraded Successor
successor cross-reference
successor
10335339Upgraded Successor
successor cross-reference
successor
AS21919WCG03Upgraded Successor
successor cross-reference
successor
AS21919Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy AS21919WDG33?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AS21919WDG33?
AS21919WDG33 is a CLAMP,LOOP.
What parts can replace AS21919WDG33?
There are 13 known substitutes for AS21919WDG33: MIL-DTL-8603, TA1716WS4, MS21919WG4 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AS21919WDG33?
AS21919WDG33 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-618-1177. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AS21919WDG33

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026