AS21919WDG01 — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

AS21919WDG01: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.209 INCHES NOMINAL IN, material: ALUMINUM ALLOY OVERALL, overall_width: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN, style_designator: OFFSET MOUNT, material_thickness: 0.020 INCHES NOMINAL IN, loop_inside_diameter: 0.047 INCHES MINIMUM AND 0.077 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-137-0913, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

AS21919WDG01

NSN: 5340-01-137-0913
FSC: 5340 — Hardware, Commercial
CAGE: 81343 — SOCIETY OF AUTOMOTIVE ENGINEERS INC (USA)

SPECIFICATIONS

diameter	0.209 INCHES NOMINAL IN
material	ALUMINUM ALLOY OVERALL
overall_width	0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
style_designator	OFFSET MOUNT
material_thickness	0.020 INCHES NOMINAL IN
loop_inside_diameter	0.047 INCHES MINIMUM AND 0.077 INCHES MAXIMUM IN
end_item_identification	MULTIPLE LAUNCH ROCKET SYSTEM (MLRS)
distance_from_loop_center_to_tongue_end	0.624 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole	0.436 INCHES NOMINAL IN
NSN	5340-01-137-0913

COMPONENT DIAGRAM

KEY FEATURES

•

STYLE DESIGNATOR: OFFSET MOUNT

•

DIAMETER: 0.209 INCHES NOMINAL IN

•

MATERIAL THICKNESS: 0.020 INCHES NOMINAL IN

•

DISTANCE FROM LOOP CENTER TO TONGUE END: 0.624 INCHES NOMINAL IN

•

CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.436 INCHES NOMINAL IN

•

MATERIAL: ALUMINUM ALLOY OVERALL

TECHNICAL CHARACTERISTICS

STYLE DESIGNATOR	OFFSET MOUNT
DIAMETER	0.209 INCHES NOMINAL IN
OVERALL WIDTH	0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
MATERIAL THICKNESS	0.020 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END	0.624 INCHES NOMINAL IN
END ITEM IDENTIFICATION	MULTIPLE LAUNCH ROCKET SYSTEM (MLRS)
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE	0.436 INCHES NOMINAL IN
MATERIAL	ALUMINUM ALLOY OVERALL
LOOP INSIDE DIAMETER	0.047 INCHES MINIMUM AND 0.077 INCHES MAXIMUM IN

SUBSTITUTES & CROSS-REFERENCES 8

SAE-AS21919Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

MS21919DG1Reference document

Same NSN cross-reference

Reference document — Secondary reference

AS21919WDG1Reference document

Same NSN cross-reference

Reference document — Secondary reference

AS21919DG01Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

MS21919WDG1Reference document

Same NSN cross-reference

Reference document — Secondary reference

AS21919DG1Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

No demilitarization required

Ready to buy AS21919WDG01?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is AS21919WDG01?

AS21919WDG01 is a CLAMP,LOOP.

What parts can replace AS21919WDG01?

There are 8 known substitutes for AS21919WDG01: SAE-AS21919, MS21919DG1, AS21919WDG1 and 5 more. Substitute compatibility should be verified for your specific system.

What is the NSN for AS21919WDG01?

AS21919WDG01 is cataloged in the U.S. Government catalog under NSN 5340-01-137-0913. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

AS21919WDG01 — CLAMP,LOOP

Request a Quote — AS21919WDG01