The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 1.125 INCHES NOMINAL IN, material: RUBBER ETHYLENE-PROPYLENE CLASS EPM CUSHION, temp_rating: 275.0 CELSIUS DEGC, overall_width: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN, inside_diameter: 1.110 INCHES MINIMUM AND 1.140 INCHES MAXIMUM IN, style_designator: OFFSET MOUNT. This part is cataloged in the U.S.
Government catalog under NSN 5340-01-703-3554, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
AS21919WDE18
NSN:5340-01-703-3554 FSC:5340 — Hardware, Commercial CAGE:0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
diameter
1.125 INCHES NOMINAL IN
material
RUBBER ETHYLENE-PROPYLENE CLASS EPM CUSHION
temp_rating
275.0 CELSIUS DEGC
overall_width
0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
inside_diameter
1.110 INCHES MINIMUM AND 1.140 INCHES MAXIMUM IN
style_designator
OFFSET MOUNT
tongue_hole_type
ROUND, UNTHREADED
material_diameter
0.052 INCHES MINIMUM AND 0.072 INCHES MAXIMUM IN
surface_treatment
CHROMIUM BAND
material_thickness
0.052 INCHES MINIMUM AND 0.072 INCHES MAXIMUM IN
loop_inside_diameter
1.110 INCHES MINIMUM AND 1.140 INCHES MAXIMUM IN
specification/standard_data
0U583-AS21919 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
NSN
5340-01-703-3554
COMPONENT DIAGRAM
KEY FEATURES
•
TEMP RATING: 275.0 CELSIUS DEGC
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-DTL-5541, CLASS 1A MIL SPEC ALL TREATMENT RESPONSES BAND A
•
CUSHIONING ENVIRONMENTAL PROTECTION: HYDRAULIC FLUID AND OZONE RESISTANT
•
MATERIAL DIAMETER: 0.052 INCHES MINIMUM AND 0.072 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: OFFSET MOUNT
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS-QQ-A-250/5 AEROSPACE MATERIAL SPEC STD ALL MATERIAL RESPONSES BAND
•
DIAMETER: 1.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
TEMP RATING
275.0 CELSIUS DEGC
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
MIL-DTL-5541, CLASS 1A MIL SPEC ALL TREATMENT RESPONSES BAND A
CUSHIONING ENVIRONMENTAL PROTECTION
HYDRAULIC FLUID AND OZONE RESISTANT
MATERIAL DIAMETER
0.052 INCHES MINIMUM AND 0.072 INCHES MAXIMUM IN
STYLE DESIGNATOR
OFFSET MOUNT
MATERIAL DOCUMENT AND CLASSIFICATION
AMS-QQ-A-250/5 AEROSPACE MATERIAL SPEC STD ALL MATERIAL RESPONSES BAND
MATERIAL DOCUMENT AND CLASSIFICATION
MIL-DTL-85052/2 MIL SPEC ALL MATERIAL RESPONSES OR AMS3253 AEROSPACE MATERIAL SPEC STD ALL MATERIAL RESPONSES CUSHION
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AS21919WDE18?
AS21919WDE18 is a CLAMP,LOOP.
What parts can replace AS21919WDE18?
There are 2 known substitutes for AS21919WDE18: AS21919 REV A, SAE-AS21919. Substitute compatibility should be verified for your specific system.
What is the NSN for AS21919WDE18?
AS21919WDE18 is cataloged in the U.S. Government catalog under NSN 5340-01-703-3554. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.