PartsTable
Technical Data Sheet
Download PDF

AS21919WCH4 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

AS21919WCH4: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN, material: RUBBER SILICONE CLASS Q CUSHION, overall_width: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: PASSIVATE BAND. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-140-0925, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AS21919WCH4
NSN: 5340-01-140-0925
FSC: 5340 — Hardware, Commercial
CAGE: 81343 — SOCIETY OF AUTOMOTIVE ENGINEERS INC (USA)
SPECIFICATIONS
diameter0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
materialRUBBER SILICONE CLASS Q CUSHION
overall_width0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
style_designatorOFFSET MOUNT
tongue_hole_typeROUND, UNTHREADED
surface_treatmentPASSIVATE BAND
material_thickness0.032 INCHES MINIMUM IN
loop_inside_diameter0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
cushioning_environmental_protectionCORROSION RESISTANT AND WEATHER RESISTANT AND OIL RESISTANT
material_document_and_classificationMIL-S-6721 MIL SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end0.817 INCHES NOMINAL IN
surface_treatment_document_and_classificationQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE BAND
NSN5340-01-140-0925
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AS21919WCH4 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE BAND
•
CUSHIONING ENVIRONMENTAL PROTECTION: CORROSION RESISTANT AND WEATHER RESISTANT AND OIL RESISTANT
•
STYLE DESIGNATOR: OFFSET MOUNT
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 3303 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
•
DIAMETER: 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.032 INCHES MINIMUM IN
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE BAND
CUSHIONING ENVIRONMENTAL PROTECTIONCORROSION RESISTANT AND WEATHER RESISTANT AND OIL RESISTANT
STYLE DESIGNATOROFFSET MOUNT
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 3303 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6721 MIL SPEC SINGLE MATERIAL RESPONSE BAND
DIAMETER0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
OVERALL WIDTH0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
MATERIAL THICKNESS0.032 INCHES MINIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.817 INCHES NOMINAL IN
SURFACE TREATMENTPASSIVATE BAND
SUBSTITUTES & CROSS-REFERENCES 7
MS21919WCH4Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
5340PL1672950Reference document
Same NSN cross-reference
Reference document — Informative reference only
PT104554Reference document
Same NSN cross-reference
Reference document — Secondary reference
AS21919WCH04Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
MS21919DH4Reference document
Same NSN cross-reference
Reference document — Secondary reference
3177T70Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy AS21919WCH4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AS21919WCH4?
AS21919WCH4 is a CLAMP,LOOP.
What parts can replace AS21919WCH4?
There are 7 known substitutes for AS21919WCH4: MS21919WCH4, 5340PL1672950, PT104554 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AS21919WCH4?
AS21919WCH4 is cataloged in the U.S. Government catalog under NSN 5340-01-140-0925. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AS21919WCH4