AS21919WCH35 — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

AS21919WCH35: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN, material: RUBBER SILICONE CLASS Q CUSHION, overall_width: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: PASSIVATE BAND. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-447-2082, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

AS21919WCH35

NSN: 5340-01-447-2082
FSC: 5340 — Hardware, Commercial
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)

SPECIFICATIONS

diameter	0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
material	RUBBER SILICONE CLASS Q CUSHION
overall_width	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
style_designator	OFFSET MOUNT
tongue_hole_type	ROUND, UNTHREADED
surface_treatment	PASSIVATE BAND
material_thickness	0.040 INCHES NOMINAL IN
loop_inside_diameter	2.173 INCHES MINIMUM AND 2.203 INCHES MAXIMUM IN
material_document_and_classification	MIL-S-5059 FED SPEC 1ST MATERIAL RESPONSE OR AMS 5510 ASSN STD 2ND MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end	1.788 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole	1.555 INCHES MINIMUM AND 1.585 INCHES MAXIMUM IN
NSN	5340-01-447-2082

COMPONENT DIAGRAM

KEY FEATURES

•

STYLE DESIGNATOR: OFFSET MOUNT

•

MATERIAL DOCUMENT AND CLASSIFICATION: AMS 3303 ASSN STD SINGLE MATERIAL RESPONSE CUSHION

•

DIAMETER: 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN

•

MATERIAL THICKNESS: 0.040 INCHES NOMINAL IN

•

DISTANCE FROM LOOP CENTER TO TONGUE END: 1.788 INCHES NOMINAL IN

•

SURFACE TREATMENT: PASSIVATE BAND

TECHNICAL CHARACTERISTICS

STYLE DESIGNATOR	OFFSET MOUNT
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 3303 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5059 FED SPEC 1ST MATERIAL RESPONSE OR AMS 5510 ASSN STD 2ND MATERIAL RESPONSE BAND
DIAMETER	0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
OVERALL WIDTH	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
MATERIAL THICKNESS	0.040 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END	1.788 INCHES NOMINAL IN
SURFACE TREATMENT	PASSIVATE BAND
TONGUE HOLE TYPE	ROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE	1.555 INCHES MINIMUM AND 1.585 INCHES MAXIMUM IN

SUBSTITUTES & CROSS-REFERENCES 2

SAE-AS21919Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

MS21919WCH35Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy AS21919WCH35?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is AS21919WCH35?

AS21919WCH35 is a CLAMP,LOOP.

What parts can replace AS21919WCH35?

There are 2 known substitutes for AS21919WCH35: SAE-AS21919, MS21919WCH35. Substitute compatibility should be verified for your specific system.

What is the NSN for AS21919WCH35?

AS21919WCH35 is cataloged in the U.S. Government catalog under NSN 5340-01-447-2082. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

AS21919WCH35 — CLAMP,LOOP

Request a Quote — AS21919WCH35