AS21919WCH15 — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

AS21919WCH15: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: SILICON CUSHION, overall_width: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN, special_features: OUTSIDE DIAMETER IS 15/16 OF AN INCH, style_designator: OFFSET MOUNT, material_diameter: 0.320 INCHES NOMINAL IN, material_thickness: 0.320 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-564-1922, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

AS21919WCH15

NSN: 5340-01-564-1922
FSC: 5340 — Hardware, Commercial
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)

SPECIFICATIONS

material	SILICON CUSHION
overall_width	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
special_features	OUTSIDE DIAMETER IS 15/16 OF AN INCH
style_designator	OFFSET MOUNT
material_diameter	0.320 INCHES NOMINAL IN
material_thickness	0.320 INCHES NOMINAL IN
loop_inside_diameter	0.923 INCHES MINIMUM AND 0.953 INCHES MAXIMUM IN
distance_from_loop_center_to_tongue_end	1.123 INCHES MINIMUM AND 1.153 INCHES MAXIMUM IN
center_to_center_distance_between_loop_and_mounting_hole	0.905 INCHES MINIMUM AND 0.935 INCHES MAXIMUM IN
NSN	5340-01-564-1922

COMPONENT DIAGRAM

KEY FEATURES

•

MATERIAL DIAMETER: 0.320 INCHES NOMINAL IN

•

STYLE DESIGNATOR: OFFSET MOUNT

•

MATERIAL THICKNESS: 0.320 INCHES NOMINAL IN

•

DISTANCE FROM LOOP CENTER TO TONGUE END: 1.123 INCHES MINIMUM AND 1.153 INCHES MAXIMUM IN

•

CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.905 INCHES MINIMUM AND 0.935 INCHES MAXIMUM IN

•

MATERIAL: STEEL CORROSION RESISTING BAND

TECHNICAL CHARACTERISTICS

MATERIAL DIAMETER	0.320 INCHES NOMINAL IN
STYLE DESIGNATOR	OFFSET MOUNT
OVERALL WIDTH	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
MATERIAL THICKNESS	0.320 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END	1.123 INCHES MINIMUM AND 1.153 INCHES MAXIMUM IN
SPECIAL FEATURES	OUTSIDE DIAMETER IS 15/16 OF AN INCH
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE	0.905 INCHES MINIMUM AND 0.935 INCHES MAXIMUM IN
MATERIAL	STEEL CORROSION RESISTING BAND
MATERIAL	SILICON CUSHION
LOOP INSIDE DIAMETER	0.923 INCHES MINIMUM AND 0.953 INCHES MAXIMUM IN

SUBSTITUTES & CROSS-REFERENCES 1

SAE-AS21919Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy AS21919WCH15?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is AS21919WCH15?

AS21919WCH15 is a CLAMP,LOOP.

What parts can replace AS21919WCH15?

There is 1 known substitute for AS21919WCH15: SAE-AS21919. Substitute compatibility should be verified for your specific system.

What is the NSN for AS21919WCH15?

AS21919WCH15 is cataloged in the U.S. Government catalog under NSN 5340-01-564-1922. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

AS21919WCH15 — CLAMP,LOOP

Request a Quote — AS21919WCH15