AS21919WCG32 — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

AS21919WCG32: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN, material: STEEL CORROSION RESISTING BAND, overall_width: 0.500 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.040 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-196-8801, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

AS21919WCG32

NSN: 5340-01-196-8801
FSC: 5340 — Hardware, Commercial
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)

SPECIFICATIONS

diameter	0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
material	STEEL CORROSION RESISTING BAND
overall_width	0.500 INCHES NOMINAL IN
style_designator	SINGLE LOOP
tongue_hole_type	ROUND, UNTHREADED
material_thickness	0.040 INCHES NOMINAL IN
loop_inside_diameter	2.000 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end	1.693 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole	1.460 INCHES MINIMUM AND 1.490 INCHES MAXIMUM IN
NSN	5340-01-196-8801

COMPONENT DIAGRAM

KEY FEATURES

•

STYLE DESIGNATOR: SINGLE LOOP

•

DIAMETER: 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN

•

MATERIAL THICKNESS: 0.040 INCHES NOMINAL IN

•

DISTANCE FROM LOOP CENTER TO TONGUE END: 1.693 INCHES NOMINAL IN

•

TONGUE HOLE TYPE: ROUND, UNTHREADED

•

CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 1.460 INCHES MINIMUM AND 1.490 INCHES MAXIMUM IN

•

MATERIAL: STEEL CORROSION RESISTING BAND

TECHNICAL CHARACTERISTICS

STYLE DESIGNATOR	SINGLE LOOP
DIAMETER	0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
OVERALL WIDTH	0.500 INCHES NOMINAL IN
MATERIAL THICKNESS	0.040 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END	1.693 INCHES NOMINAL IN
TONGUE HOLE TYPE	ROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE	1.460 INCHES MINIMUM AND 1.490 INCHES MAXIMUM IN
MATERIAL	STEEL CORROSION RESISTING BAND
MATERIAL	RUBBER CHLOROPRENE CLASS CR CUSHION
LOOP INSIDE DIAMETER	2.000 INCHES NOMINAL IN

SUBSTITUTES & CROSS-REFERENCES 2

MS21919WCG32Reference document

Same NSN cross-reference

Reference document — Secondary reference

SAE-AS21919Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Shelf-life managedAcquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy AS21919WCG32?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is AS21919WCG32?

AS21919WCG32 is a CLAMP,LOOP.

What parts can replace AS21919WCG32?

There are 2 known substitutes for AS21919WCG32: MS21919WCG32, SAE-AS21919. Substitute compatibility should be verified for your specific system.

What is the NSN for AS21919WCG32?

AS21919WCG32 is cataloged in the U.S. Government catalog under NSN 5340-01-196-8801. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

AS21919WCG32 — CLAMP,LOOP

Request a Quote — AS21919WCG32