PartsTable
Technical Data Sheet
Download PDF

AS21919WCF27 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

AS21919WCF27: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include temp_rating: 275.0 FAHRENHEIT DEGF, overall_width: 0.5 INCHES NOMINAL IN, inside_diameter: 1.688 INCHES NOMINAL IN, part_name_assigned_by_controlling_agency: CLAMP,LOOP TYPE,CUSHIONED SUPPORT, center_to_center_distance_between_loop_and_mounting_hole: 1.344 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-712-0449, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AS21919WCF27
NSN: 5340-01-712-0449
FSC: 5340 — Hardware, Commercial
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
temp_rating275.0 FAHRENHEIT DEGF
overall_width0.5 INCHES NOMINAL IN
inside_diameter1.688 INCHES NOMINAL IN
part_name_assigned_by_controlling_agencyCLAMP,LOOP TYPE,CUSHIONED SUPPORT
center_to_center_distance_between_loop_and_mounting_hole1.344 INCHES NOMINAL IN
NSN5340-01-712-0449
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AS21919WCF27 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: 275.0 FAHRENHEIT DEGF
•
INSIDE DIAMETER: 1.688 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 1.344 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
TEMP RATING275.0 FAHRENHEIT DEGF
OVERALL WIDTH0.5 INCHES NOMINAL IN
INSIDE DIAMETER1.688 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYCLAMP,LOOP TYPE,CUSHIONED SUPPORT
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.344 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
SAE-AS21919Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy AS21919WCF27?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AS21919WCF27?
AS21919WCF27 is a CLAMP,LOOP.
What parts can replace AS21919WCF27?
There is 1 known substitute for AS21919WCF27: SAE-AS21919. Substitute compatibility should be verified for your specific system.
What is the NSN for AS21919WCF27?
AS21919WCF27 is cataloged in the U.S. Government catalog under NSN 5340-01-712-0449. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AS21919WCF27

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.