PartsTable
Technical Data Sheet
Download PDF

AS21908 — INJECTOR ASSEMBLY,FUEL

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

AS21908: INJECTOR ASSEMBLY,FUEL.

The INJECTOR ASSEMBLY,FUEL is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, flow_angle: 90.0 DEGREES, leg_length: 1.031 INCHES MINIMUM AND 1.078 INCHES MAXIMUM SECOND END IN, seat_angle: 12.0 DEGREES ALL ENDS, thread_class: 3A ALL ENDS A, connection_type: THREADED EXTERNAL TUBE ALL ENDS. This part is cataloged in the U.S.

Government catalog under NSN 4730-00-173-5160, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AS21908
NSN: 4730-00-173-5160
NIINs: 001735160, 001941790, 002033689, 002788161, 004673149, 004753918, 004802097, 004834938, 005413168, 006400830, 006400831, 006401216, 006405089, 006843574, 006843576, 007200983, 008072274, 008166801, 008258543, 008262071, 008277738, 008371170, 008784736, 008935898, 011716646, 012890753, 014107354, 014360109, 015426323, 015426327, 015426330, 015426332, 015426336, 015426340, 015426345, 015426347, 015426351
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
flow_angle90.0 DEGREES
leg_length1.031 INCHES MINIMUM AND 1.078 INCHES MAXIMUM SECOND END IN
seat_angle12.0 DEGREES ALL ENDS
thread_class3A ALL ENDS A
connection_typeTHREADED EXTERNAL TUBE ALL ENDS
connection_styleFLARELESS (TUBE) ALL ENDS
special_featuresMATERIAL CORROSION RESISTANT STEEL (15-5PH) CADMIUM PLATED; FIRST END HAS BULKHEAD THREADS
nominal_thread_size0.375 INCHES ALL ENDS IN
thread_quantity_per_inch12 ALL ENDS
thread_series_designatorUNIFIED NATIONAL JOINT FINE (UNJF) ALL ENDS
specification/standard_data81343 - AS21908 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
NSN4730-00-173-5160
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: AS21908 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLOW ANGLE: 90.0 DEGREES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625,TYPE 2,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
CONNECTION TYPE: THREADED EXTERNAL TUBE FIRST END BULKHEAD
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-367,T73 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED: 0.250 INCHES ALL ENDS IN
•
OPERATING PRESSURE: 3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
•
LEG LENGTH: 1.500 INCHES NOMINAL FIRST END IN
TECHNICAL CHARACTERISTICS
FLOW ANGLE90.0 DEGREES
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625,TYPE 2,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
CONNECTION TYPETHREADED EXTERNAL TUBE FIRST END BULKHEAD
CONNECTION TYPETHREADED EXTERNAL TUBE ALL ENDS
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-367,T73 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED0.250 INCHES ALL ENDS IN
OPERATING PRESSURE3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
LEG LENGTH1.500 INCHES NOMINAL FIRST END IN
LEG LENGTH0.938 INCHES NOMINAL SECOND END IN
REDUCED PASSAGE NOMINAL INSIDE DIAMETER0.188 INCHES ALL ENDS IN
OTHER ITEMS IN FSC 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
4730-00-000-1895 4730-00-000-4289 4730-00-000-4445 4730-00-000-8373 4730-00-000-8897 4730-00-001-0007 4730-00-001-0008
SUBSTITUTES & CROSS-REFERENCES 4
4730PL0973806Reference document
Same NSN cross-reference
Reference document — Informative reference only
AS18280Reference document
Same NSN cross-reference
Reference document — Secondary reference
MS21908W4Reference document
Same NSN cross-reference
Reference document — Secondary reference
SAE-AS18280Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy AS21908?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AS21908?
AS21908 is a INJECTOR ASSEMBLY,FUEL.
What parts can replace AS21908?
There are 4 known substitutes for AS21908: 4730PL0973806, AS18280, MS21908W4 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AS21908?
AS21908 is cataloged in the U.S. Government catalog under NSN 4730-00-173-5160. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AS21908

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.