PartsTable
Technical Data Sheet
Download PDF

AS19879C12 — WASHER,RECESSED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

AS19879C12: WASHER,RECESSED.

The WASHER,RECESSED is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY 718 OVERALL, recess_angle: 90.0 DEGREES NOMINAL, hole_diameter: 0.752 INCHES MINIMUM AND 0.756 INCHES MAXIMUM IN, recess_diameter: 0.903 INCHES MINIMUM AND 0.913 INCHES MAXIMUM IN, outside_diameter: 1.775 INCHES MINIMUM AND 1.785 INCHES MAXIMUM IN, style_designator: RECESSED. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-341-8555, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AS19879C12
NSN: 5310-01-341-8555
FSC: 5310 — Nuts and Washers
CAGE: 10630 — ANILLO INDUSTRIES LLC (USA)
SPECIFICATIONS
materialNICKEL ALLOY 718 OVERALL
recess_angle90.0 DEGREES NOMINAL
hole_diameter0.752 INCHES MINIMUM AND 0.756 INCHES MAXIMUM IN
recess_diameter0.903 INCHES MINIMUM AND 0.913 INCHES MAXIMUM IN
outside_diameter1.775 INCHES MINIMUM AND 1.785 INCHES MAXIMUM IN
style_designatorRECESSED
surface_treatmentPASSIVATE OVERALL
material_thickness0.099 INCHES MINIMUM AND 0.119 INCHES MAXIMUM IN
material_document_and_classificationAMS 5525 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-01-341-8555
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: AS19879C12 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
STYLE DESIGNATOR: RECESSED
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5525 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 1.775 INCHES MINIMUM AND 1.785 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.099 INCHES MINIMUM AND 0.119 INCHES MAXIMUM IN
•
RECESS DIAMETER: 0.903 INCHES MINIMUM AND 0.913 INCHES MAXIMUM IN
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
MATERIAL: NICKEL ALLOY 718 OVERALL
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
STYLE DESIGNATORRECESSED
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5525 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER1.775 INCHES MINIMUM AND 1.785 INCHES MAXIMUM IN
MATERIAL THICKNESS0.099 INCHES MINIMUM AND 0.119 INCHES MAXIMUM IN
RECESS DIAMETER0.903 INCHES MINIMUM AND 0.913 INCHES MAXIMUM IN
SURFACE TREATMENTPASSIVATE OVERALL
MATERIALNICKEL ALLOY 718 OVERALL
HOLE DIAMETER0.752 INCHES MINIMUM AND 0.756 INCHES MAXIMUM IN
RECESS ANGLE90.0 DEGREES NOMINAL
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 2
MM118C12Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
03A257C12Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy AS19879C12?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AS19879C12?
AS19879C12 is a WASHER,RECESSED.
What parts can replace AS19879C12?
There are 2 known substitutes for AS19879C12: MM118C12, 03A257C12. Substitute compatibility should be verified for your specific system.
What is the NSN for AS19879C12?
AS19879C12 is cataloged in the U.S. Government catalog under NSN 5310-01-341-8555. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AS19879C12

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.