PartsTable
Technical Data Sheet

AS1895/16-325 — FERRULE,BRAZING,TUBE FITTING

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

AS1895/16-325: FERRULE,BRAZING,TUBE FITTING.

The FERRULE,BRAZING,TUBE FITTING is a the manufacturer industrial component. Key specifications include special_features: MATERIAL-NICKEL ALLOY 625;MDCL-AMS 5599,5666 OR AMS 5581;SURFACE TREATMENT-DESCALED, end_item_identification: F-35, flange_outside_diameter: 3.760 INCHES NOMINAL IN, sleeve_outside_diameter: 3.285 INCHES NOMINAL IN, part_name_assigned_by_controlling_agency: FLANGE,MALE,INTEGRAL,WELD RING,TYPE II LOW PROFILE, hose/tube_outside_diameter_for_which_designed: 3.25 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 4730-01-634-0358, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AS1895/16-325
NSN: 4730-01-634-0358
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
special_featuresMATERIAL-NICKEL ALLOY 625;MDCL-AMS 5599,5666 OR AMS 5581;SURFACE TREATMENT-DESCALED
end_item_identificationF-35
flange_outside_diameter3.760 INCHES NOMINAL IN
sleeve_outside_diameter3.285 INCHES NOMINAL IN
part_name_assigned_by_controlling_agencyFLANGE,MALE,INTEGRAL,WELD RING,TYPE II LOW PROFILE
hose/tube_outside_diameter_for_which_designed3.25 INCHES NOMINAL IN
NSN4730-01-634-0358
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: AS1895/16-325 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SLEEVE OUTSIDE DIAMETER: 3.285 INCHES NOMINAL IN
•
FLANGE OUTSIDE DIAMETER: 3.760 INCHES NOMINAL IN
•
HOSE/TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED: 3.25 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SLEEVE OUTSIDE DIAMETER3.285 INCHES NOMINAL IN
SPECIAL FEATURESMATERIAL-NICKEL ALLOY 625;MDCL-AMS 5599,5666 OR AMS 5581;SURFACE TREATMENT-DESCALED
PART NAME ASSIGNED BY CONTROLLING AGENCYFLANGE,MALE,INTEGRAL,WELD RING,TYPE II LOW PROFILE
END ITEM IDENTIFICATIONF-35
FLANGE OUTSIDE DIAMETER3.760 INCHES NOMINAL IN
HOSE/TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED3.25 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
SAE-AS1895Reference document
Same NSN cross-reference
Reference document — Secondary reference
SAE-AS1895/16Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy AS1895/16-325?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AS1895/16-325?
AS1895/16-325 is a FERRULE,BRAZING,TUBE FITTING.
What parts can replace AS1895/16-325?
There are 2 known substitutes for AS1895/16-325: SAE-AS1895, SAE-AS1895/16. Substitute compatibility should be verified for your specific system.
What is the NSN for AS1895/16-325?
AS1895/16-325 is cataloged in the U.S. Government catalog under NSN 4730-01-634-0358. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AS1895/16-325

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.