PartsTable
Technical Data Sheet
Download PDF

AS1713 — NUT ASSEMBLY,TUBE COUPLING

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

AS1713: NUT ASSEMBLY,TUBE COUPLING.

The NUT ASSEMBLY,TUBE COUPLING is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY, thread_size: 3.750-12, thread_class: 2B, overall_length: 0.701 INCHES NOMINAL IN, outside_diameter: 3.927 INCHES NOMINAL IN, special_features: FURNISHED WITH TWO WASHERS. This part is cataloged in the U.S.

Government catalog under NSN 4730-00-948-8088, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AS1713
NSN: 4730-00-948-8088
NIINs: 009488088, 009490329, 009539430
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
materialALUMINUM ALLOY
thread_size3.750-12
thread_class2B
overall_length0.701 INCHES NOMINAL IN
outside_diameter3.927 INCHES NOMINAL IN
special_featuresFURNISHED WITH TWO WASHERS
style_designatorNUT ASSEMBLY
thread_directionRIGHT-HAND
surface_treatmentANODIZE
working_temp_and_service_type65.0 DEG FAHRENHEIT MINIMUM JET FUEL AND 160.0 DEG FAHRENHEIT MAXIMUM JET FUEL
screw_thread_series_designatorUN
working_pressure_and_service_type125.0 POUNDS PER SQUARE INCH (PSI) NOMINAL JET FUEL LBS
NSN4730-00-948-8088
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: AS1713 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 2.407 INCHES NOMINAL IN
•
MATERIAL: ALUMINUM ALLOY
TECHNICAL CHARACTERISTICS
OVERALL LENGTH0.701 INCHES NOMINAL IN
OUTSIDE DIAMETER2.407 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYHALF CONNECTOR FOR MALE BOSS
MATERIALALUMINUM ALLOY
SUBSTITUTES & CROSS-REFERENCES 4
AS1710Reference document
Same NSN cross-reference
Reference document — Secondary reference
SAE-AS1710Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
AS1713D24Reference document
Same NSN cross-reference
Reference document — Secondary reference
63551-24AReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy AS1713?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AS1713?
AS1713 is a NUT ASSEMBLY,TUBE COUPLING.
What parts can replace AS1713?
There are 4 known substitutes for AS1713: AS1710, SAE-AS1710, AS1713D24 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AS1713?
AS1713 is cataloged in the U.S. Government catalog under NSN 4730-00-948-8088. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AS1713