PartsTable
Technical Data Sheet
Download PDF

AS169-5-39 — SCREW,CLOSE TOLERANCE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

AS169-5-39: SCREW,CLOSE TOLERANCE.

The SCREW,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include material: STEEL COMP XM-13 OVERALL, head_style: CROWNED HEXAGON, grip_length: 2.438 INCHES MINIMUM AND 2.454 INCHES MAXIMUM IN, head_height: 0.157 INCHES MINIMUM AND 0.172 INCHES MAXIMUM IN, thread_class: 3A A, grip_diameter: 0.3112 INCHES MINIMUM AND 0.3117 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-014-1419, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AS169-5-39
NSN: 5305-01-014-1419
FSC: 5305 — Screws
CAGE: 84256 — AVIBANK MFG., INC. DBA AVIBANK MANUFACTURING INC (USA)
SPECIFICATIONS
materialSTEEL COMP XM-13 OVERALL
head_styleCROWNED HEXAGON
grip_length2.438 INCHES MINIMUM AND 2.454 INCHES MAXIMUM IN
head_height0.157 INCHES MINIMUM AND 0.172 INCHES MAXIMUM IN
thread_class3A A
grip_diameter0.3112 INCHES MINIMUM AND 0.3117 INCHES MAXIMUM IN
thread_length0.305 INCHES MINIMUM AND 0.356 INCHES MAXIMUM IN
surface_finish32.0 MICROINCHES BEARING SURFACE OF HEAD
fastener_length2.915 INCHES MINIMUM AND 2.935 INCHES MAXIMUM IN
special_featuresRETAINING ELEMENT IN SHANK
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
NSN5305-01-014-1419
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: AS169-5-39 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 32.0 MICROINCHES GRIP
•
HEAD HEIGHT: 0.157 INCHES MINIMUM AND 0.172 INCHES MAXIMUM IN
•
FASTENER LENGTH: 2.915 INCHES MINIMUM AND 2.935 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.305 INCHES MINIMUM AND 0.356 INCHES MAXIMUM IN
•
SHANK UNTHREADED HOLE DIAMETER: 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS
SURFACE FINISH32.0 MICROINCHES GRIP
SURFACE FINISH32.0 MICROINCHES BEARING SURFACE OF HEAD
HEAD HEIGHT0.157 INCHES MINIMUM AND 0.172 INCHES MAXIMUM IN
FASTENER LENGTH2.915 INCHES MINIMUM AND 2.935 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH0.305 INCHES MINIMUM AND 0.356 INCHES MAXIMUM IN
SHANK UNTHREADED HOLE DIAMETER0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.312 INCHES IN
HEAD STYLECROWNED HEXAGON
SUBSTITUTES & CROSS-REFERENCES 4
SS5112-539Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
NASM3369Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
CA2658-5-39Reference document
Same NSN cross-reference
Reference document — Secondary reference
MS3369B539Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy AS169-5-39?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AS169-5-39?
AS169-5-39 is a SCREW,CLOSE TOLERANCE.
What parts can replace AS169-5-39?
There are 4 known substitutes for AS169-5-39: SS5112-539, NASM3369, CA2658-5-39 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AS169-5-39?
AS169-5-39 is cataloged in the U.S. Government catalog under NSN 5305-01-014-1419. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AS169-5-39

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.