AS116-04-0123 — HOSE ASSEMBLY,NONMETALLIC

✓ Government record, cited

— · PIPE SECTION

PRODUCT OVERVIEW

AS116-04-0123: HOSE ASSEMBLY,NONMETALLIC.

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include flow_angle: 45.0 DEGREES SECOND END, seat_angle: 12.0 DEGREES FIRST END, temp_rating: -65.0 FAHRENHEIT AND 400.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 2B FIRST END, connection_type: THREADED INTERNAL TUBE SECOND END, inside_diameter: 0.212 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 4720-01-034-1317, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

AS116-04-0123

NSN: 4720-01-034-1317
FSC: 4720 — Hose and Flexible Tubing
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)

SPECIFICATIONS

flow_angle	45.0 DEGREES SECOND END
seat_angle	12.0 DEGREES FIRST END
temp_rating	-65.0 FAHRENHEIT AND 400.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class	2B FIRST END
connection_type	THREADED INTERNAL TUBE SECOND END
inside_diameter	0.212 INCHES NOMINAL IN
connection_style	SWIVEL NUT, FLARELESS SECOND END
outside_diameter	0.400 INCHES NOMINAL IN
thread_direction	RIGHT-HAND SECOND END
operating_pressure	3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure	12000.0 POUNDS PER SQUARE INCH LBS
nominal_thread_size	0.438 INCHES FIRST END IN
NSN	4720-01-034-1317

COMPONENT DIAGRAM

KEY FEATURES

•

FLOW ANGLE: 45.0 DEGREES SECOND END

•

FSC APPLICATION DATA: HYDRAULIC INSTALLATION,LEFT HAND WING PANEL-TRAILING EDGE PART NUMBER PL160D630006,ACFT A-10

•

MEASURING METHOD AND LENGTH: 12.375 INCHES NOMINAL WORKING IN

•

TEMP RATING: -65.0 FAHRENHEIT AND 400.0 FAHRENHEIT SINGLE RESPONSE DEGF

•

MINIMUM INSIDE BENDING RADIUS: 1.500 INCHES IN

•

CONNECTION STYLE: SWIVEL NUT, FLARELESS SECOND END

•

END CONNECTION DESIGN: ELBOW SECOND END

TECHNICAL CHARACTERISTICS

FLOW ANGLE	45.0 DEGREES SECOND END
FSC APPLICATION DATA	HYDRAULIC INSTALLATION,LEFT HAND WING PANEL-TRAILING EDGE PART NUMBER PL160D630006,ACFT A-10
MEASURING METHOD AND LENGTH	12.375 INCHES NOMINAL WORKING IN
TEMP RATING	-65.0 FAHRENHEIT AND 400.0 FAHRENHEIT SINGLE RESPONSE DEGF
MINIMUM INSIDE BENDING RADIUS	1.500 INCHES IN
CONNECTION STYLE	SWIVEL NUT, FLARELESS SECOND END
CONNECTION STYLE	SWIVEL NUT, FLARELESS FIRST END
END CONNECTION DESIGN	ELBOW SECOND END
END CONNECTION DESIGN	STRAIGHT FIRST END
LAYER COMPOSITION AND LOCATION	OUTER LAYER BRAIDED STEEL WIRE

SUBSTITUTES & CROSS-REFERENCES 8

R736CC42-04-0125Reference document

Same NSN cross-reference

Reference document — Secondary reference

SAE-AS1339Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

171143-4CR-0125Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

170143-4CR0125Reference document

Same NSN cross-reference

Reference document — Secondary reference

AC116-04-0125Reference document

Same NSN cross-reference

Reference document — Secondary reference

AS116Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy AS116-04-0123?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is AS116-04-0123?

AS116-04-0123 is a HOSE ASSEMBLY,NONMETALLIC.

What parts can replace AS116-04-0123?

There are 8 known substitutes for AS116-04-0123: R736CC42-04-0125, SAE-AS1339, 171143-4CR-0125 and 5 more. Substitute compatibility should be verified for your specific system.

What is the NSN for AS116-04-0123?

AS116-04-0123 is cataloged in the U.S. Government catalog under NSN 4720-01-034-1317. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

AS116-04-0123 — HOSE ASSEMBLY,NONMETALLIC

Request a Quote — AS116-04-0123