AS10485-C5 — WASHER,RECESSED

✓ Government record, cited

— · NUT WASHER

PRODUCT OVERVIEW

AS10485-C5: WASHER,RECESSED.

The WASHER,RECESSED is a the manufacturer industrial component. Key specifications include recess_angle: 90.0 DEGREES NOMINAL, hole_diameter: 0.314 INCHES MINIMUM AND 0.318 INCHES MAXIMUM IN, recess_diameter: 0.402 INCHES MINIMUM AND 0.412 INCHES MAXIMUM IN, outside_diameter: 0.583 INCHES MINIMUM AND 0.603 INCHES MAXIMUM IN, special_features: HEAT TREATMENT,260,000 PS8 MIN, style_designator: RECESSED. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-176-7022, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

AS10485-C5

NSN: 5310-01-176-7022
FSC: 5310 — Nuts and Washers
CAGE: 10630 — ANILLO INDUSTRIES LLC (USA)

SPECIFICATIONS

recess_angle	90.0 DEGREES NOMINAL
hole_diameter	0.314 INCHES MINIMUM AND 0.318 INCHES MAXIMUM IN
recess_diameter	0.402 INCHES MINIMUM AND 0.412 INCHES MAXIMUM IN
outside_diameter	0.583 INCHES MINIMUM AND 0.603 INCHES MAXIMUM IN
special_features	HEAT TREATMENT,260,000 PS8 MIN
style_designator	RECESSED
material_thickness	0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
material_document_and_classification	AMS 5758 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5844 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN	5310-01-176-7022

COMPONENT DIAGRAM

KEY FEATURES

•

STYLE DESIGNATOR: RECESSED

•

MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5758 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5844 ASSN STD SINGLE MATERIAL RESPONSE OVERALL

•

OUTSIDE DIAMETER: 0.583 INCHES MINIMUM AND 0.603 INCHES MAXIMUM IN

•

MATERIAL THICKNESS: 0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN

•

RECESS DIAMETER: 0.402 INCHES MINIMUM AND 0.412 INCHES MAXIMUM IN

•

HOLE DIAMETER: 0.314 INCHES MINIMUM AND 0.318 INCHES MAXIMUM IN

•

RECESS ANGLE: 90.0 DEGREES NOMINAL

TECHNICAL CHARACTERISTICS

STYLE DESIGNATOR	RECESSED
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5758 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5844 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER	0.583 INCHES MINIMUM AND 0.603 INCHES MAXIMUM IN
MATERIAL THICKNESS	0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
RECESS DIAMETER	0.402 INCHES MINIMUM AND 0.412 INCHES MAXIMUM IN
SPECIAL FEATURES	HEAT TREATMENT,260,000 PS8 MIN
HOLE DIAMETER	0.314 INCHES MINIMUM AND 0.318 INCHES MAXIMUM IN
RECESS ANGLE	90.0 DEGREES NOMINAL

OTHER ITEMS IN FSC 5310 — Nuts and Washers

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540

SUBSTITUTES & CROSS-REFERENCES 2

HS4134C5Reference document

Same NSN cross-reference

Reference document — Secondary reference

75708C-5Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy AS10485-C5?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is AS10485-C5?

AS10485-C5 is a WASHER,RECESSED.

What parts can replace AS10485-C5?

There are 2 known substitutes for AS10485-C5: HS4134C5, 75708C-5. Substitute compatibility should be verified for your specific system.

What is the NSN for AS10485-C5?

AS10485-C5 is cataloged in the U.S. Government catalog under NSN 5310-01-176-7022. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

AS10485-C5 — WASHER,RECESSED

Request a Quote — AS10485-C5