AS-568A-009,70SL — O-RING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

AS-568A-009,70SL: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE CLASS Q, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.337 INCHES MINIMUM AND 0.359 INCHES MAXIMUM IN, center_hole_diameter: 0.203 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-052-9730, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

AS-568A-009,70SL

NSN: 5331-00-052-9730
FSC: 5331 — O-ring
CAGE: 62351 — APPLE RUBBER PRODUCTS, INC. DBA APPLE RUBBER PRODUCTS INC (USA)

SPECIFICATIONS

material	RUBBER SILICONE CLASS Q
hardness_rating	70.0 SHORE DUROMETER A NOMINAL
outside_diameter	0.337 INCHES MINIMUM AND 0.359 INCHES MAXIMUM IN
center_hole_diameter	0.203 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN
elongation_percentage	125 MAXIMUM
cross-sectional_height	0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN	5331-00-052-9730

COMPONENT DIAGRAM

KEY FEATURES

•

CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN

•

OUTSIDE DIAMETER: 0.337 INCHES MINIMUM AND 0.359 INCHES MAXIMUM IN

•

HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL

•

ELONGATION PERCENTAGE: 125 MAXIMUM

•

CENTER HOLE DIAMETER: 0.203 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN

•

MATERIAL: RUBBER SILICONE CLASS Q

TECHNICAL CHARACTERISTICS

CROSS-SECTIONAL HEIGHT	0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
OUTSIDE DIAMETER	0.337 INCHES MINIMUM AND 0.359 INCHES MAXIMUM IN
HARDNESS RATING	70.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE	125 MAXIMUM
CENTER HOLE DIAMETER	0.203 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN
MATERIAL	RUBBER SILICONE CLASS Q

SUBSTITUTES & CROSS-REFERENCES 6

AS3582-009Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

S8057R4Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

SAE-AS3582Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

2-009 S604-70Reference document

Same NSN cross-reference

Reference document — Secondary reference

MS9068-009Reference document

Same NSN cross-reference

Reference document — Secondary reference

10154101Reference document

Same NSN cross-reference

Reference document — Informative reference only

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy AS-568A-009,70SL?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is AS-568A-009,70SL?

AS-568A-009,70SL is a O-RING.

What parts can replace AS-568A-009,70SL?

There are 6 known substitutes for AS-568A-009,70SL: AS3582-009, S8057R4, SAE-AS3582 and 3 more. Substitute compatibility should be verified for your specific system.

What is the NSN for AS-568A-009,70SL?

AS-568A-009,70SL is cataloged in the U.S. Government catalog under NSN 5331-00-052-9730. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

AS-568A-009,70SL — O-RING

Request a Quote — AS-568A-009,70SL