PartsTable
Technical Data Sheet
PartsTable / O-RING / AS-568-024
AS-568-024 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include outside_diameter: 1.250 INCHES NOMINAL IN, special_features: INSIDE DIA 1.114, part_name_assigned_by_controlling_agency: O-RING. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-249-2259, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AS-568-024
NSN: 5331-00-249-2259
FSC: 5331 — O-RING
CAGE: 81343 — SOCIETY OF AUTOMOTIVE ENGINEERS INC (USA)
SPECIFICATIONS
outside_diameter1.250 INCHES NOMINAL IN
special_featuresINSIDE DIA 1.114
part_name_assigned_by_controlling_agencyO-RING
NSN5331-00-249-2259
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AS-568-024 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
MATERIAL: RUBBER
•
CENTER HOLE DIAMETER: 1.108 INCHES MINIMUM AND 1.120 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 1.254 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
MATERIALRUBBER
CENTER HOLE DIAMETER1.108 INCHES MINIMUM AND 1.120 INCHES MAXIMUM IN
OUTSIDE DIAMETER1.254 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
AS568-024 2AA815A13F17EA14Interchangeable
interchangeable cross-reference
interchangeable
2-024E515-8Interchangeable
interchangeable cross-reference
interchangeable
GV-39-619-12HTInterchangeable
interchangeable cross-reference
interchangeable
AS568-024Interchangeable
interchangeable cross-reference
interchangeable
2-024AMS3651Interchangeable
interchangeable cross-reference
interchangeable
2-024TEFL0NInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy AS-568-024?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AS-568-024?
AS-568-024 is a O-RING.
What parts can replace AS-568-024?
There are 21 known substitutes for AS-568-024: AS568-024 2AA815A13F17EA14, 2-024E515-8, GV-39-619-12HT and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AS-568-024?
AS-568-024 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-249-2259. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AS-568-024

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026