PartsTable
Technical Data Sheet

ART 4101 2 1/8 — SCREW,TAPPING

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

ART 4101 2 1/8: SCREW,TAPPING.

The SCREW,TAPPING is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: PAN, head_height: 0.066 INCHES NOMINAL IN, head_diameter: 0.156 INCHES NOMINAL IN, fastener_length: 0.191 INCHES NOMINAL IN, surface_treatment: CADMIUM OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-180-6849, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ART 4101 2 1/8
NSN: 5305-01-180-6849
FSC: 5305 — Screws
CAGE: K2158 — EUROPEAN INDUSTRIAL SERVICES LTD T/A NETTLEFOLDS (GBR)
SPECIFICATIONS
materialSTEEL OVERALL
head_stylePAN
head_height0.066 INCHES NOMINAL IN
head_diameter0.156 INCHES NOMINAL IN
fastener_length0.191 INCHES NOMINAL IN
surface_treatmentCADMIUM OVERALL
internal_drive_styleSLOT
nonmachine_nominal_thread_diameter0.086 INCHES IN
NSN5305-01-180-6849
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: ART 4101 2 1/8 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NONMACHINE NOMINAL THREAD DIAMETER: 0.086 INCHES IN
•
HEAD HEIGHT: 0.066 INCHES NOMINAL IN
•
FASTENER LENGTH: 0.191 INCHES NOMINAL IN
•
HEAD STYLE: PAN
•
SURFACE TREATMENT: CADMIUM OVERALL
•
INTERNAL DRIVE STYLE: SLOT
•
MATERIAL: STEEL OVERALL
•
HEAD DIAMETER: 0.156 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
NONMACHINE NOMINAL THREAD DIAMETER0.086 INCHES IN
HEAD HEIGHT0.066 INCHES NOMINAL IN
FASTENER LENGTH0.191 INCHES NOMINAL IN
HEAD STYLEPAN
SURFACE TREATMENTCADMIUM OVERALL
INTERNAL DRIVE STYLESLOT
MATERIALSTEEL OVERALL
HEAD DIAMETER0.156 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 2
P400376Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
P321801Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy ART 4101 2 1/8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ART 4101 2 1/8?
ART 4101 2 1/8 is a SCREW,TAPPING.
What parts can replace ART 4101 2 1/8?
There are 2 known substitutes for ART 4101 2 1/8: P400376, P321801. Substitute compatibility should be verified for your specific system.
What is the NSN for ART 4101 2 1/8?
ART 4101 2 1/8 is cataloged in the U.S. Government catalog under NSN 5305-01-180-6849. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ART 4101 2 1/8