PartsTable
Technical Data Sheet
PartsTable / O-RING / ARP568-904MILP5 516 70DURM
ARP568-904MILP5 516 70DURM ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, temp_rating: 275.0 FAHRENHEIT DEGF, center_hole_diameter: 0.346 INCHES MINIMUM AND 0.356 INCHES MAXIMUM IN, cross-sectional_height: 0.069 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-389-9188, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ARP568-904MILP5 516 70DURM
NSN: 5331-01-389-9188
FSC: 5331 — O-RING
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
temp_rating275.0 FAHRENHEIT DEGF
center_hole_diameter0.346 INCHES MINIMUM AND 0.356 INCHES MAXIMUM IN
cross-sectional_height0.069 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
NSN5331-01-389-9188
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: ARP568-904MILP5 516 70DURM MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 0.346 INCHES MINIMUM AND 0.356 INCHES MAXIMUM IN
•
TEMP RATING: 275.0 FAHRENHEIT DEGF
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
CROSS-SECTIONAL HEIGHT: 0.069 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER0.346 INCHES MINIMUM AND 0.356 INCHES MAXIMUM IN
TEMP RATING275.0 FAHRENHEIT DEGF
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
CROSS-SECTIONAL HEIGHT0.069 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 29
AN116965Interchangeable
interchangeable cross-reference
interchangeable
4-36-5Interchangeable
interchangeable cross-reference
interchangeable
436-5REVBInterchangeable
interchangeable cross-reference
interchangeable
5331PL0813732Interchangeable
interchangeable cross-reference
interchangeable
M83461/2-902Interchangeable
interchangeable cross-reference
interchangeable
MIL-P-83461Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy ARP568-904MILP5 516 70DURM?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ARP568-904MILP5 516 70DURM?
ARP568-904MILP5 516 70DURM is a O-RING.
What parts can replace ARP568-904MILP5 516 70DURM?
There are 29 known substitutes for ARP568-904MILP5 516 70DURM: AN116965, 4-36-5, 436-5REVB and 26 more. Substitute compatibility should be verified for your specific system.
Is ARP568-904MILP5 516 70DURM still available?
ARP568-904MILP5 516 70DURM is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ARP568-904MILP5 516 70DURM

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026