PartsTable
Technical Data Sheet
Download PDF

ARP568-902MILG23652TY2 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

ARP568-902MILG23652TY2: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, center_hole_diameter: 0.232 INCHES MINIMUM AND 0.246 INCHES MAXIMUM IN, cross-sectional_height: 0.061 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN, criticality_code_justification: ZZZY, material_document_and_classification: MIL-G-23652,TY 2 MIL SPEC SINGLE MATERIAL RESPONSE, reference_number_differentiating_characteristics: CLEANING, PACKAGING AND MARKING IAW MIL-STD-1330D. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-425-2283, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ARP568-902MILG23652TY2
NSN: 5331-00-425-2283
NIINs: 004252283, 010292343
FSC: 5331 — O-ring
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM
center_hole_diameter0.232 INCHES MINIMUM AND 0.246 INCHES MAXIMUM IN
cross-sectional_height0.061 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN
criticality_code_justificationZZZY
material_document_and_classificationMIL-G-23652,TY 2 MIL SPEC SINGLE MATERIAL RESPONSE
reference_number_differentiating_characteristicsCLEANING, PACKAGING AND MARKING IAW MIL-STD-1330D
NSN5331-00-425-2283
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: ARP568-902MILG23652TY2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.061 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.367 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 0.232 INCHES MINIMUM AND 0.246 INCHES MAXIMUM IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.061 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.367 INCHES NOMINAL IN
CENTER HOLE DIAMETER0.232 INCHES MINIMUM AND 0.246 INCHES MAXIMUM IN
MATERIALRUBBER FLUOROCARBON CLASS FPM
SUBSTITUTES & CROSS-REFERENCES 1
A6689.902.212Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy ARP568-902MILG23652TY2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ARP568-902MILG23652TY2?
ARP568-902MILG23652TY2 is a O-RING.
What parts can replace ARP568-902MILG23652TY2?
There is 1 known substitute for ARP568-902MILG23652TY2: A6689.902.212. Substitute compatibility should be verified for your specific system.
What is the NSN for ARP568-902MILG23652TY2?
ARP568-902MILG23652TY2 is cataloged in the U.S. Government catalog under NSN 5331-00-425-2283. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ARP568-902MILG23652TY2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.