PartsTable
Technical Data Sheet
Download PDF

ARP568-245MILG23652TYPE1 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

ARP568-245MILG23652TYPE1: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, outside_diameter: 4.637 INCHES NOMINAL IN, center_hole_diameter: 4.344 INCHES MINIMUM AND 4.374 INCHES MAXIMUM IN, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-706-8652, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ARP568-245MILG23652TYPE1
NSN: 5331-00-706-8652
FSC: 5331 — O-ring
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM
outside_diameter4.637 INCHES NOMINAL IN
center_hole_diameter4.344 INCHES MINIMUM AND 4.374 INCHES MAXIMUM IN
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
NSN5331-00-706-8652
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: ARP568-245MILG23652TYPE1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 4.637 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 4.344 INCHES MINIMUM AND 4.374 INCHES MAXIMUM IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
OUTSIDE DIAMETER4.637 INCHES NOMINAL IN
CENTER HOLE DIAMETER4.344 INCHES MINIMUM AND 4.374 INCHES MAXIMUM IN
MATERIALRUBBER FLUOROCARBON CLASS FPM
OTHER ITEMS IN FSC 5331 — O-ring
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5331-00-001-1971 5331-00-001-1979 5331-00-001-3904 5331-00-001-3905 5331-00-001-3906 5331-00-001-3908 5331-00-001-3923 5331-00-001-3924
SUBSTITUTES & CROSS-REFERENCES 1
F17227-18Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy ARP568-245MILG23652TYPE1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ARP568-245MILG23652TYPE1?
ARP568-245MILG23652TYPE1 is a O-RING.
What parts can replace ARP568-245MILG23652TYPE1?
There is 1 known substitute for ARP568-245MILG23652TYPE1: F17227-18. Substitute compatibility should be verified for your specific system.
What is the NSN for ARP568-245MILG23652TYPE1?
ARP568-245MILG23652TYPE1 is cataloged in the U.S. Government catalog under NSN 5331-00-706-8652. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ARP568-245MILG23652TYPE1