PartsTable
Technical Data Sheet
PartsTable / O-RING / ARP568-120VIT0N90DUR0METER
ARP568-120VIT0N90DUR0METER ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, temp_rating: -20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF, hardness_rating: 90.0 SHORE DUROMETER A NOMINAL, outside_diameter: 1.193 INCHES NOMINAL IN, center_hole_diameter: 0.977 INCHES MINIMUM AND 0.997 INCHES MAXIMUM IN, cross-sectional_height: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-166-1076, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ARP568-120VIT0N90DUR0METER
NSN: 5331-00-166-1076
FSC: 5331 — O-RING
CAGE: 02697 — PARKER-HANNIFIN CORP DIV O-RING DIVISION (USA)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM
temp_rating-20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
hardness_rating90.0 SHORE DUROMETER A NOMINAL
outside_diameter1.193 INCHES NOMINAL IN
center_hole_diameter0.977 INCHES MINIMUM AND 0.997 INCHES MAXIMUM IN
cross-sectional_height0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
NSN5331-00-166-1076
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: ARP568-120VIT0N90DUR0METER MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 28
500292Interchangeable
interchangeable cross-reference
interchangeable
0-50-120Interchangeable
interchangeable cross-reference
interchangeable
568120-2Interchangeable
interchangeable cross-reference
interchangeable
AS568-120Interchangeable
interchangeable cross-reference
interchangeable
Z00.N7423510008TBMInterchangeable
interchangeable cross-reference
interchangeable
AS3209-120Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy ARP568-120VIT0N90DUR0METER?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ARP568-120VIT0N90DUR0METER?
ARP568-120VIT0N90DUR0METER is a O-RING.
What parts can replace ARP568-120VIT0N90DUR0METER?
There are 28 known substitutes for ARP568-120VIT0N90DUR0METER: 500292, 0-50-120, 568120-2 and 25 more. Substitute compatibility should be verified for your specific system.
Is ARP568-120VIT0N90DUR0METER still available?
ARP568-120VIT0N90DUR0METER is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ARP568-120VIT0N90DUR0METER

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026