PartsTable
Technical Data Sheet
Download PDF

ARP568-012IDSACP — PACKING,PREFORMED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

ARP568-012IDSACP: PACKING,PREFORMED.

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include peripheral_diameter: 0.504 INCHES NOMINAL IN, center_hole_diameter: 0.359 INCHES MINIMUM AND 0.369 INCHES MAXIMUM IN, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN, criticality_code_justification: ZZZY, reference_number_differentiating_characteristics: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-455-6403, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ARP568-012IDSACP
NSN: 5330-00-455-6403
FSC: 5330 — Packing and Gasket Materials
CAGE: 03950 — NAVAL INVENTORY CONTROL POINT MECHANICSBURG (USA)
SPECIFICATIONS
peripheral_diameter0.504 INCHES NOMINAL IN
center_hole_diameter0.359 INCHES MINIMUM AND 0.369 INCHES MAXIMUM IN
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
criticality_code_justificationZZZY
reference_number_differentiating_characteristicsCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
NSN5330-00-455-6403
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: ARP568-012IDSACP MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
CRITICALITY CODE JUSTIFICATION: ZZZY
•
PERIPHERAL DIAMETER: 0.504 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 0.359 INCHES MINIMUM AND 0.369 INCHES MAXIMUM IN
•
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
CRITICALITY CODE JUSTIFICATIONZZZY
PERIPHERAL DIAMETER0.504 INCHES NOMINAL IN
CENTER HOLE DIAMETER0.359 INCHES MINIMUM AND 0.369 INCHES MAXIMUM IN
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICSCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
SUBSTITUTES & CROSS-REFERENCES 3
000012EACPReference document
Same NSN cross-reference
Reference document — Secondary reference
0X000012EACPSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
000012EAReference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy ARP568-012IDSACP?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ARP568-012IDSACP?
ARP568-012IDSACP is a PACKING,PREFORMED.
What parts can replace ARP568-012IDSACP?
There are 3 known substitutes for ARP568-012IDSACP: 000012EACP, 0X000012EACP, 000012EA. Substitute compatibility should be verified for your specific system.
What is the NSN for ARP568-012IDSACP?
ARP568-012IDSACP is cataloged in the U.S. Government catalog under NSN 5330-00-455-6403. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ARP568-012IDSACP

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.