PartsTable
Technical Data Sheet

ARP 568-932-523HW — Technical Data Sheet

✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, temp_rating: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF, outside_diameter: 2.573 INCHES NOMINAL IN, center_hole_diameter: 2.327 INCHES MINIMUM AND 2.347 INCHES MAXIMUM IN, elongation_percentage: 160 MAXIMUM, cross-sectional_height: 0.114 INCHES MINIMUM AND 0.122 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System under NSN 5331-00-765-2104, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ARP 568-932-523HW
NSN: 5331-00-765-2104
FSC: 5331 — O-RING
CAGE: 07322 — MINNESOTA RUBBER CO (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
temp_rating-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
outside_diameter2.573 INCHES NOMINAL IN
center_hole_diameter2.327 INCHES MINIMUM AND 2.347 INCHES MAXIMUM IN
elongation_percentage160 MAXIMUM
cross-sectional_height0.114 INCHES MINIMUM AND 0.122 INCHES MAXIMUM IN
NSN5331-00-765-2104
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: ARP 568-932-523HW MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.114 INCHES MINIMUM AND 0.122 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 2.327 INCHES MINIMUM AND 2.347 INCHES MAXIMUM IN
•
TEMP RATING: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
OUTSIDE DIAMETER: 2.573 INCHES NOMINAL IN
•
ELONGATION PERCENTAGE: 160 MAXIMUM
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.114 INCHES MINIMUM AND 0.122 INCHES MAXIMUM IN
CENTER HOLE DIAMETER2.327 INCHES MINIMUM AND 2.347 INCHES MAXIMUM IN
TEMP RATING-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
OUTSIDE DIAMETER2.573 INCHES NOMINAL IN
ELONGATION PERCENTAGE160 MAXIMUM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
7602-1InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
AS568-932MIL-G-21610 TY 1InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
AS568-932InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
242 P.C.100GInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
77466InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
32034 ITEM 25InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVEGOVERNMENT REGISTRY
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy ARP 568-932-523HW?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ARP 568-932-523HW?
ARP 568-932-523HW is a O-RING.
What parts can replace ARP 568-932-523HW?
There are 17 known substitutes for ARP 568-932-523HW: 7602-1, AS568-932MIL-G-21610 TY 1, AS568-932 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for ARP 568-932-523HW?
ARP 568-932-523HW is cataloged in the Federal Logistics Information System under NSN 5331-00-765-2104. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ARP 568-932-523HW