ARHT4E102 — BEARING,PLAIN,ROD END

✓ Government record, cited

— · BALL BEARING

PRODUCT OVERVIEW

ARHT4E102: BEARING,PLAIN,ROD END.

The BEARING,PLAIN,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL COMP 440C INNER MEMBER, shank_style: EXTERNALLY THREADED, thread_class: 3A A, bore_diameter: 0.2495 INCHES MINIMUM AND 0.2515 INCHES MAXIMUM IN, overall_length: 1.9630 INCHES NOMINAL IN, hardness_rating: 36.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM ROD END BODY. This part is cataloged in the U.S.

Government catalog under NSN 3120-00-540-6518, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

ARHT4E102

NSN: 3120-00-540-6518
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: J1011 — MINEBEA MITSUMI INC. DIV RODEND-FASTENER BUSINESS UNIT (JPN)

SPECIFICATIONS

material	STEEL COMP 440C INNER MEMBER
shank_style	EXTERNALLY THREADED
thread_class	3A A
bore_diameter	0.2495 INCHES MINIMUM AND 0.2515 INCHES MAXIMUM IN
overall_length	1.9630 INCHES NOMINAL IN
hardness_rating	36.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM ROD END BODY
thread_diameter	0.250 INCHES NOMINAL IN
style_designator	BALL TYPE
thread_direction	RIGHT-HAND
surface_treatment	PASSIVATE RACE INSERT
inner_member_width	0.3700 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN
outer_member_width	0.3370 INCHES NOMINAL IN
NSN	3120-00-540-6518

COMPONENT DIAGRAM

KEY FEATURES

•

SHANK THREAD LENGTH: 0.9650 INCHES MINIMUM AND 1.0280 INCHES MAXIMUM IN

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE INNER MEMBER

•

BORE CENTER TO SHANK END DISTANCE: 1.5600 INCHES NOMINAL IN

•

INNER MEMBER WIDTH: 0.3700 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN

•

HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM INNER MEMBER

TECHNICAL CHARACTERISTICS

SHANK THREAD LENGTH	0.9650 INCHES MINIMUM AND 1.0280 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE INNER MEMBER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE RACE INSERT
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE ROD END BODY
BORE CENTER TO SHANK END DISTANCE	1.5600 INCHES NOMINAL IN
INNER MEMBER WIDTH	0.3700 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN
HARDNESS RATING	36.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM INNER MEMBER
HARDNESS RATING	36.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM ROD END BODY
OUTER MEMBER WIDTH	0.3370 INCHES NOMINAL IN
STYLE DESIGNATOR	BALL TYPE

SUBSTITUTES & CROSS-REFERENCES 1

A25101Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy ARHT4E102?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is ARHT4E102?

ARHT4E102 is a BEARING,PLAIN,ROD END.

What parts can replace ARHT4E102?

There is 1 known substitute for ARHT4E102: A25101. Substitute compatibility should be verified for your specific system.

What is the NSN for ARHT4E102?

ARHT4E102 is cataloged in the U.S. Government catalog under NSN 3120-00-540-6518. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

ARHT4E102 — BEARING,PLAIN,ROD END

Request a Quote — ARHT4E102