PartsTable
Technical Data Sheet
Download PDF

AP50N5 — PACKING,PREFORMED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

AP50N5: PACKING,PREFORMED.

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: NICKEL OVERALL, special_features: SPHERICAL AND ARC RADIUS CONTACT SEALING RING FOR FLARED FITTINGS USED ON 0.312 INCH DIA.TUBE SIZE IN, peripheral_diameter: 0.445 INCHES NOMINAL IN, center_hole_diameter: 0.255 INCHES NOMINAL IN, cross-sectional_height: 0.155 INCHES MINIMUM AND 0.203 INCHES MAXIMUM IN, cross-sectional_shape_style: CUP. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-994-0721, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AP50N5
NSN: 5330-00-994-0721
FSC: 5330 — Packing and Gasket Materials
CAGE: 01673 — SPS TECHNOLOGIES, LLC DBA AIRDROME PRECISION COMPONENTS (USA)
SPECIFICATIONS
materialNICKEL OVERALL
special_featuresSPHERICAL AND ARC RADIUS CONTACT SEALING RING FOR FLARED FITTINGS USED ON 0.312 INCH DIA.TUBE SIZE IN
peripheral_diameter0.445 INCHES NOMINAL IN
center_hole_diameter0.255 INCHES NOMINAL IN
cross-sectional_height0.155 INCHES MINIMUM AND 0.203 INCHES MAXIMUM IN
cross-sectional_shape_styleCUP
NSN5330-00-994-0721
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AP50N5 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.155 INCHES MINIMUM AND 0.203 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: CUP
•
PERIPHERAL DIAMETER: 0.445 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 0.255 INCHES NOMINAL IN
•
MATERIAL: NICKEL OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.155 INCHES MINIMUM AND 0.203 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLECUP
PERIPHERAL DIAMETER0.445 INCHES NOMINAL IN
SPECIAL FEATURESSPHERICAL AND ARC RADIUS CONTACT SEALING RING FOR FLARED FITTINGS USED ON 0.312 INCH DIA.TUBE SIZE IN
CENTER HOLE DIAMETER0.255 INCHES NOMINAL IN
MATERIALNICKEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
29094Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
DY90-N5Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy AP50N5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AP50N5?
AP50N5 is a PACKING,PREFORMED.
What parts can replace AP50N5?
There are 2 known substitutes for AP50N5: 29094, DY90-N5. Substitute compatibility should be verified for your specific system.
What is the NSN for AP50N5?
AP50N5 is cataloged in the U.S. Government catalog under NSN 5330-00-994-0721. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AP50N5