AP1-2-441-4 — RESISTOR,VARIABLE,WIRE WOUND,NON

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

AP1-2-441-4: RESISTOR,VARIABLE,WIRE WOUND,NON.

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include body_style: CYLINDRICAL BUSHING MOUNTED, body_length: 0.625 INCHES MAXIMUM IN, shaft_style: ROUND, SLOTTED, shaft_length: 0.422 INCHES MINIMUM AND 0.453 INCHES MAXIMUM IN, actuator_type: SINGLE SHAFT, body_diameter: 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5905-00-853-1908, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ AP1-2-441-4

NSN: 5905-00-853-1908
FSC: 5905 — Resistor
CAGE: 06880 — DATA INSTRUMENTS INC (USA)

SPECIFICATIONS

body_style	CYLINDRICAL BUSHING MOUNTED
body_length	0.625 INCHES MAXIMUM IN
shaft_style	ROUND, SLOTTED
shaft_length	0.422 INCHES MINIMUM AND 0.453 INCHES MAXIMUM IN
actuator_type	SINGLE SHAFT
body_diameter	0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
overall_length	1.063 INCHES NOMINAL IN
shaft_diameter	0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
mounting_method	STANDARD BUSHING
overall_diameter	0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
section_quantity	1
terminal_location	REAR END LOCATION NOT OTHERWISE SPECIFIED
NSN	5905-00-853-1908

COMPONENT DIAGRAM

KEY FEATURES

•

NONTURN DEVICE LOCATION: AT 6 OCLOCK

•

BODY DIAMETER: 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN

•

SCREW THREAD QUANTITY PER INCH: 32.0

•

ELECTRICAL RESISTANCE PER SECTION: 2.0 KILOHMS SINGLE SECTION

•

SECTION QUANTITY: 1

•

SHAFT DIAMETER: 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN

•

NONTURN DEVICE RADIUS: 0.152 INCHES MINIMUM AND 0.192 INCHES MAXIMUM IN

•

BODY STYLE: CYLINDRICAL BUSHING MOUNTED

TECHNICAL CHARACTERISTICS

NONTURN DEVICE LOCATION	AT 6 OCLOCK
BODY DIAMETER	0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
SCREW THREAD QUANTITY PER INCH	32.0
ELECTRICAL RESISTANCE PER SECTION	2.0 KILOHMS SINGLE SECTION
SECTION QUANTITY	1
SHAFT DIAMETER	0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
NONTURN DEVICE RADIUS	0.152 INCHES MINIMUM AND 0.192 INCHES MAXIMUM IN
BODY STYLE	CYLINDRICAL BUSHING MOUNTED
OVERALL DIAMETER	0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
MOUNTING METHOD	STANDARD BUSHING

OTHER ITEMS IN FSC 5905 — Resistor

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5905-00-000-0136 5905-00-000-0488 5905-00-000-8809 5905-00-000-8833 5905-00-000-9526 5905-00-001-1342 5905-00-001-1573 5905-00-001-2059

SUBSTITUTES & CROSS-REFERENCES 3

AP05C141-3S7-2001AReference document

Same NSN cross-reference

Reference document — Secondary reference

50M29-3S7-2001AReference document

Same NSN cross-reference

Reference document — Secondary reference

ES699-3S7-2001ASame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

No demilitarization required

Ready to buy AP1-2-441-4?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is AP1-2-441-4?

AP1-2-441-4 is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).

What parts can replace AP1-2-441-4?

There are 3 known substitutes for AP1-2-441-4: AP05C141-3S7-2001A, 50M29-3S7-2001A, ES699-3S7-2001A. Substitute compatibility should be verified for your specific system.

What is the NSN for AP1-2-441-4?

AP1-2-441-4 is cataloged in the U.S. Government catalog under NSN 5905-00-853-1908. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

AP1-2-441-4 — RESISTOR,VARIABLE,WIRE WOUND,NON

Request a Quote — AP1-2-441-4