PartsTable
Technical Data Sheet
Download PDF

AP1-1-8-220 — RESISTOR,VARIABLE,WIRE WOUND,NON

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

AP1-1-8-220: RESISTOR,VARIABLE,WIRE WOUND,NON.

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include body_style: CYLINDRICAL BUSHING MOUNTED, body_length: 1.000 INCHES MAXIMUM IN, shaft_style: ROUND, UNDERCUT, shaft_length: 0.797 INCHES MINIMUM AND 0.828 INCHES MAXIMUM IN, actuator_type: SINGLE SHAFT, body_diameter: 1.312 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5905-00-712-8617, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ AP1-1-8-220
NSN: 5905-00-712-8617
FSC: 5905 — Resistor
CAGE: 94603 — HONEYWELL SENSING & CONTROL (USA)
SPECIFICATIONS
body_styleCYLINDRICAL BUSHING MOUNTED
body_length1.000 INCHES MAXIMUM IN
shaft_styleROUND, UNDERCUT
shaft_length0.797 INCHES MINIMUM AND 0.828 INCHES MAXIMUM IN
actuator_typeSINGLE SHAFT
body_diameter1.312 INCHES MAXIMUM IN
overall_length2.187 INCHES NOMINAL IN
shaft_diameter0.248 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
mounting_methodSTANDARD BUSHING
undercut_length0.281 INCHES NOMINAL IN
overall_diameter1.312 INCHES MAXIMUM IN
section_quantity1
NSN5905-00-712-8617
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available RESISTOR,VARIABLE,WIRE WOUND,NON TITLE COMPONENT PN AP1-1-8-220 MFR RESISTOR,VARIABLE,WIRE
KEY FEATURES
•
NONTURN DEVICE LOCATION: NONTURN DEVICE 168 DEG CW FROM 12 OCLOCK
•
BODY DIAMETER: 1.312 INCHES MAXIMUM IN
•
SCREW THREAD QUANTITY PER INCH: 32.0
•
UNDERCUT LENGTH: 0.281 INCHES NOMINAL IN
•
ELECTRICAL RESISTANCE PER SECTION: 10.000 KILOHMS SINGLE SECTION
•
SECTION QUANTITY: 1
•
SHAFT DIAMETER: 0.248 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
•
NONTURN DEVICE RADIUS: 0.422 INCHES MINIMUM AND 0.453 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
NONTURN DEVICE LOCATIONNONTURN DEVICE 168 DEG CW FROM 12 OCLOCK
BODY DIAMETER1.312 INCHES MAXIMUM IN
SCREW THREAD QUANTITY PER INCH32.0
UNDERCUT LENGTH0.281 INCHES NOMINAL IN
ELECTRICAL RESISTANCE PER SECTION10.000 KILOHMS SINGLE SECTION
SECTION QUANTITY1
SHAFT DIAMETER0.248 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
NONTURN DEVICE RADIUS0.422 INCHES MINIMUM AND 0.453 INCHES MAXIMUM IN
BODY STYLECYLINDRICAL BUSHING MOUNTED
OVERALL DIAMETER1.312 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5905 — Resistor
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5905-00-000-0136 5905-00-000-0488 5905-00-000-8809 5905-00-000-8833 5905-00-000-9526 5905-00-001-1342 5905-00-001-1573 5905-00-001-2059
SUBSTITUTES & CROSS-REFERENCES 2
AP1-1-8-220-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
129677-01Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy AP1-1-8-220?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AP1-1-8-220?
AP1-1-8-220 is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).
What parts can replace AP1-1-8-220?
There are 2 known substitutes for AP1-1-8-220: AP1-1-8-220-1, 129677-01. Substitute compatibility should be verified for your specific system.
What is the NSN for AP1-1-8-220?
AP1-1-8-220 is cataloged in the U.S. Government catalog under NSN 5905-00-712-8617. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AP1-1-8-220