AP1/2 75K — RESISTOR,VARIABLE,WIRE WOUND,NON

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

AP1/2 75K: RESISTOR,VARIABLE,WIRE WOUND,NON.

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include body_style: CYLINDRICAL BUSHING MOUNTED, body_length: 0.766 INCHES MAXIMUM IN, shaft_style: ROUND, SLOTTED, shaft_length: 1.000 INCHES NOMINAL IN, actuator_type: SINGLE SHAFT, body_diameter: 0.510 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5905-00-761-9142, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ AP1/2 75K

NSN: 5905-00-761-9142
FSC: 5905 — Resistor
CAGE: 94603 — HONEYWELL SENSING & CONTROL (USA)

SPECIFICATIONS

body_style	CYLINDRICAL BUSHING MOUNTED
body_length	0.766 INCHES MAXIMUM IN
shaft_style	ROUND, SLOTTED
shaft_length	1.000 INCHES NOMINAL IN
actuator_type	SINGLE SHAFT
body_diameter	0.510 INCHES MAXIMUM IN
shaft_diameter	0.124 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
mounting_method	STANDARD BUSHING
section_quantity	1
special_features	MOUNTING METHOD: STANDARD BUSHING W/SHAFT SEAL
terminal_location	REAR END LOCATION NOT OTHERWISE SPECIFIED
nonturn_device_radius	0.187 INCHES NOMINAL IN
NSN	5905-00-761-9142

COMPONENT DIAGRAM

KEY FEATURES

•

NONTURN DEVICE LOCATION: AT 6 OCLOCK

•

BODY DIAMETER: 0.510 INCHES MAXIMUM IN

•

SCREW THREAD QUANTITY PER INCH: 32.0

•

ELECTRICAL RESISTANCE PER SECTION: 75.000 KILOHMS SINGLE SECTION

•

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER: 150.0 SINGLE SECTION

•

SECTION QUANTITY: 1

•

SHAFT DIAMETER: 0.124 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN

•

NONTURN DEVICE RADIUS: 0.187 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

NONTURN DEVICE LOCATION	AT 6 OCLOCK
BODY DIAMETER	0.510 INCHES MAXIMUM IN
SCREW THREAD QUANTITY PER INCH	32.0
ELECTRICAL RESISTANCE PER SECTION	75.000 KILOHMS SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	150.0 SINGLE SECTION
SECTION QUANTITY	1
SHAFT DIAMETER	0.124 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
NONTURN DEVICE RADIUS	0.187 INCHES NOMINAL IN
BODY STYLE	CYLINDRICAL BUSHING MOUNTED
MOUNTING METHOD	STANDARD BUSHING

OTHER ITEMS IN FSC 5905 — Resistor

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5905-00-000-0136 5905-00-000-0488 5905-00-000-8809 5905-00-000-8833 5905-00-000-9526 5905-00-001-1342 5905-00-001-1573 5905-00-001-2059

SUBSTITUTES & CROSS-REFERENCES 3

AP05-C573-753Reference document

Same NSN cross-reference

Reference document — Secondary reference

RV1-2 75KReference document

Same NSN cross-reference

Reference document — Secondary reference

927-75KReference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

No demilitarization required

Ready to buy AP1/2 75K?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is AP1/2 75K?

AP1/2 75K is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).

What parts can replace AP1/2 75K?

There are 3 known substitutes for AP1/2 75K: AP05-C573-753, RV1-2 75K, 927-75K. Substitute compatibility should be verified for your specific system.

What is the NSN for AP1/2 75K?

AP1/2 75K is cataloged in the U.S. Government catalog under NSN 5905-00-761-9142. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

AP1/2 75K — RESISTOR,VARIABLE,WIRE WOUND,NON

Request a Quote — AP1/2 75K