PartsTable
Technical Data Sheet
PartsTable / COMPONENT / ANSIA156.16TYL24211
ANSIA156.16TYL24211 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The ANSIA156.16TYL24211 is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-240-2311, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ANSIA156.16TYL24211
NSN: 5340-00-240-2311
FSC: 5340
CAGE: 80204 — AMERICAN NATIONAL STANDARDS INSTITUTE INCORPORATED DBA AMERICAN NATIONAL STANDARDS INSTITUTE (USA)
SPECIFICATIONS
Part NumberANSIA156.16TYL24211
NSN5340-00-240-2311
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: ANSIA156.16TYL24211 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STRIKE QUANTITY: 1
•
DEPARTURE FROM CITED DESIGNATOR: BAR O/A LG:6.000 IN.NOM IN
•
STRIKE TYPE: RIM
•
NONDEFINITIVE SPEC/STD DATA: 1011 TYPE
•
LENGTH: 6.000 INCHES NOMINAL PLATE IN
•
DIAMETER: 0.344 INCHES NOMINAL BAR IN
•
WIDTH: 1.313 INCHES NOMINAL PLATE IN
TECHNICAL CHARACTERISTICS (FLIS)
STRIKE QUANTITY1
DEPARTURE FROM CITED DESIGNATORBAR O/A LG:6.000 IN.NOM IN
STRIKE TYPERIM
SPECIAL FEATURESWEIGHT:6.375 LBS PER DOZEN;BAR O/A LG:6.000 IN.NOM;MATL:BRASS; LBS
NONDEFINITIVE SPEC/STD DATA1011 TYPE
LENGTH6.000 INCHES NOMINAL PLATE IN
DIAMETER0.344 INCHES NOMINAL BAR IN
WIDTH1.313 INCHES NOMINAL PLATE IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
BHMA-A156.16 L02032Interchangeable
interchangeable cross-reference
interchangeable
CD7071F8Interchangeable
interchangeable cross-reference
interchangeable
ANSI A156.16 P/N L02032Interchangeable
interchangeable cross-reference
interchangeable
ANSIA156.16L02142Interchangeable
interchangeable cross-reference
interchangeable
BHMA-A156.16 L02142Interchangeable
interchangeable cross-reference
interchangeable
BHMA-A156.16Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy ANSIA156.16TYL24211?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ANSIA156.16TYL24211?
ANSIA156.16TYL24211 is a ANSIA156.16TYL24211.
What parts can replace ANSIA156.16TYL24211?
There are 24 known substitutes for ANSIA156.16TYL24211: BHMA-A156.16 L02032, CD7071F8, ANSI A156.16 P/N L02032 and 21 more. Substitute compatibility should be verified for your specific system.
What is the NSN for ANSIA156.16TYL24211?
ANSIA156.16TYL24211 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-240-2311. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ANSIA156.16TYL24211

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026